Needing an IMSA 44mm Intake Valve for G Head
Needing an IMSA 44mm Intake Valve for G Head
I am in need of 1 intake valve. 44mm by 112mm length. Let me know what you have. I will buy a set of 4 if you have.
Thanks
Re: Needing an IMSA 44mm Intake Valve for G Head
I believe I have a gently used set.
If interested PM your phone #
Thanks
Randy
Quote:
Originally Posted by
69viper
Needing an IMSA 44mm Intake Valve for G Head
I am in need of 1 intake valve. 44mm by 112mm length. Let me know what you have. I will buy a set of 4 if you have.
Thanks
Re: Needing an IMSA 44mm Intake Valve for G Head
if it helps I'd be willing to split on that with you .. spares sound like a good idea and if you're going to use one for a repair then the set becomes three spares .. save one , pedal two (?)
just puttin' it out there .
Re: Needing an IMSA 44mm Intake Valve for G Head
I loaned him a valve so he can get his Engine back together so he's still looking.
Thanks
Randy
Re: Needing an IMSA 44mm Intake Valve for G Head
alrighty..
offer stands , I have a home for one or two spares if they need one someday ..
Re: Needing an IMSA 44mm Intake Valve for G Head
Hopefully he finds a set and we can split it up.
Thanks
Randy
Re: Needing an IMSA 44mm Intake Valve for G Head
I have a set of Mopar BV g-head valves that were never run but were assembled in a head. Machinist goofed up the seats in head, so head was scrapped. Valve tips on two of the valves were dressed a bit. One has .006 removed while the other has .011 removed. Two are untouched. One of you guys LMK if you are interested. Been sitting in a box for 25 years or so...
BTW I also have the matching BV G-head exhaust valves too. MP P4529443. Same deal. Unused but some tips heights have been altered a bit.
Todd
Re: Needing an IMSA 44mm Intake Valve for G Head
I have a set of new IMSA valves, can't remember if they're for swirl head or G-head though. Part numbers are P4286793 for intake and P4286794 for exhaust.
Re: Needing an IMSA 44mm Intake Valve for G Head
Quote:
Originally Posted by
19luis8510
I have a set of new IMSA valves, can't remember if they're for swirl head or G-head though. Part numbers are P4286793 for intake and P4286794 for exhaust.
I believe those are for the swirl head.
Re: Needing an IMSA 44mm Intake Valve for G Head
Quote:
Originally Posted by
4 l-bodies
I have a set of Mopar BV g-head valves that were never run but were assembled in a head. Machinist goofed up the seats in head, so head was scrapped. Valve tips on two of the valves were dressed a bit. One has .006 removed while the other has .011 removed. Two are untouched. One of you guys LMK if you are interested. Been sitting in a box for 25 years or so...
BTW I also have the matching BV G-head exhaust valves too. MP P4529443. Same deal. Unused but some tips heights have been altered a bit.
Todd
PM Sent
Re: Needing an IMSA 44mm Intake Valve for G Head
Hey 69viper:
Did you ever hear back from Todd??
I'm getting itchy to put my Engine back together and would like to get a valve back.
Thanks
Randy
Quote:
Originally Posted by
4 l-bodies
I have a set of Mopar BV g-head valves that were never run but were assembled in a head. Machinist goofed up the seats in head, so head was scrapped. Valve tips on two of the valves were dressed a bit. One has .006 removed while the other has .011 removed. Two are untouched. One of you guys LMK if you are interested. Been sitting in a box for 25 years or so...
BTW I also have the matching BV G-head exhaust valves too. MP P4529443. Same deal. Unused but some tips heights have been altered a bit.
Todd
Quote:
Originally Posted by
69viper
PM Sent