Printable View
,I've just run into a big problem,I'm putting a 2.5 in my glhs and found out the crank hubs are different and the crank snout has different diameter.
Iwas hoHping to swap hubs so I could use the four bolt pulley to drive the alt.p steering and AC.If anyone knows an answer help would be greatly appreciated.Thanks
Are you trying to use an under drive pulley you had from the non-common block 2.2? Why not just use the pulley off of the 2.5?
Because the 2.5 has 1 ribbed pulley and 1 v groove pulley the2.2 has 1 ribbed pulley and 2 vgroove pulleys
The 2.5 pulley you have is from a non-AC car. It should be very easy to track one down. Cheap too. Of course, if you aren't going to run AC, you don't need the outer V belt slot.