2 Attachment(s)
Re: 36-1 wheel weld to the crank service. Gathering interest.
Wish I would have taken pictures when I had mine done. I used a 60-2 wheel, had the back of my crank pulley milled down to the thickness of the wheel. Then had the wheel drilled out to the 5 bolt pattern and tested for run-out. No welding or balancing needed.:eyebrows: It also keeps the integrity of the wheel, and no welding keeps the wheel nice and straight.
http://www.turbo-mopar.com/forums/at...id=61581&stc=1
http://www.turbo-mopar.com/forums/at...id=61582&stc=1
Re: 36-1 wheel weld to the crank service. Gathering interest.
Quote:
Originally Posted by
Warren Stramer
Yes your welder is right about warping, I had to chuck my pulley/wheel assembly in the lathe after I welded it to true it up, But ,if you weld a bead, let it cool, then weld a bead 180 degrees opposite and let it cool, and take your time it might not warp. But, trust me, if you don't weld it completely around the circumference it will eventually fail.
Fully welded and balanced.
:)
http://www.thelostartof.net/tryingbe..._062550926.jpg
http://www.thelostartof.net/tryingbe..._062618670.jpg
Re: 36-1 wheel ring for 8 valve common block
I'm interested, if you are still taking a count.
Re: 36-1 wheel ring for 8 valve common block
Quote:
Originally Posted by
wheming
I'm interested, if you are still taking a count.
Are you just "interested" or are you ready to buy the ring? Total with shipping is around $52-$54. I just sold the two ring my friend has, he'll need a couple of days to make more.
Re: 36-1 wheel ring for 8 valve common block
Quote:
Originally Posted by
tryingbe
Are you just "interested" or are you ready to buy the ring? Total with shipping is around $52-$54. I just sold the two ring my friend has, he'll need a couple of days to make more.
Wow that's a lot cheaper than what I paid to have mine milled down...
Sent from my SM-S903VL using Tapatalk
Re: 36-1 wheel ring for 8 valve common block
Quote:
Originally Posted by
turboshelbys
Wow that's a lot cheaper than what I paid to have mine milled down...
Sent from my SM-S903VL using Tapatalk
http://www.thelostartof.net/tryingbe...e/36-1ring.jpg
This is what the customer will be getting. Customer will be welding the ring to a 8 valve common block crank pulley, balancing the pulley, and design/making the crank sensor bracket.
Re: 36-1 wheel ring for 8 valve common block
Quote:
Originally Posted by
tryingbe
My bad I thought that was all loaded up and ready to go
Sent from my SM-S903VL using Tapatalk
Re: 36-1 wheel ring for 8 valve common block
Quote:
Originally Posted by
tryingbe
Are you just "interested" or are you ready to buy the ring? Total with shipping is around $52-$54. I just sold the two ring my friend has, he'll need a couple of days to make more.
Yes my interest was enough to buy. ;)
Let me know when you have another batch. I think i still have you paypal info from prior purchases.
Re: 36-1 wheel weld to the crank service. Gathering interest.
Second set of 6 all sold, total of 9 sold. I can get my friend to start another group buy if three is interest for 10+. It is expensive to get time on a water jet machine.
Re: 36-1 wheel weld to the crank service. Gathering interest.
I'm interested in 1, possibly 2.
Re: 36-1 wheel weld to the crank service. Gathering interest.
are these still available?
Re: 36-1 wheel weld to the crank service. Gathering interest.
Quote:
Originally Posted by
rixsgto
are these still available?
No, and no plan of making more.
Sorry.
Re: 36-1 wheel weld to the crank service. Gathering interest.
Do you have a cad drawing in case some others wanna take a stab at it?
Brian
Re: 36-1 wheel weld to the crank service. Gathering interest.
If anyone takes up making a couple, i am in immediate need, paypal ready, $70 or best arrangement
Re: 36-1 wheel weld to the crank service. Gathering interest.
Quote:
Originally Posted by
boostbus
If anyone takes up making a couple, i am in immediate need, paypal ready, $70 or best arrangement
Keep a eye out on T-M and/or the club FB group.
There may be a option soon for a 36-1 wheel mounting adapter.
Sent from my ONEPLUS A6000 using Tapatalk
Re: 36-1 wheel weld to the crank service. Gathering interest.
[QUOTE=wheming;1157712]Keep a eye out on T-M and/or the club FB group.
There may be an option soon for a 36-1 wheel mounting adapter.
Anything new on this front? Going to mpfi on my carbed Turismo with Microsquirt. Unless something better has come along.
Got a turbo 1 intake and mpfi from an 87 Daytona
- - - Updated - - -
Re: 36-1 wheel weld to the crank service. Gathering interest.
[QUOTE=canon1753;1161839]
Quote:
Originally Posted by
wheming
Keep a eye out on T-M and/or the club FB group.
There may be an option soon for a 36-1 wheel mounting adapter.
Anything new on this front? Going to mpfi on my carbed Turismo with Microsquirt. Unless something better has come along.
Got a turbo 1 intake and mpfi from an 87 Daytona
- - - Updated - - -
Yes, they are available. I am currently still waiting on an order of SloweSpeed brackets, but I have the crank adapters.
I would prefer to wait until I have received those brackets before I accept anyone's money. But you can find info here.
If you only want the crank adapter, I could send you an invoice for just that. PM me.
https://sites.google.com/view/wheming
Sent from my KB2005 using Tapatalk
Re: 36-1 wheel weld to the crank service. Gathering interest.
Quote:
Originally Posted by
wheming
I am currently still waiting on an order of SloweSpeed brackets, but I have the crank adapters.
Wayne,
I wanted to get back with you on our previous discussion, any idea on lead time on Slowspeed bracket?
If possible, put me on the waiting list for a complete kit.
Thanks again!
Also, Congrats on your run the other weekend! Simply amazing getting these machines in the 11's!
Re: 36-1 wheel weld to the crank service. Gathering interest.
Quote:
Originally Posted by
motomick76
Wayne,
I wanted to get back with you on our previous discussion, any idea on lead time on Slowspeed bracket?
If possible, put me on the waiting list for a complete kit.
Thanks again!
Also, Congrats on your run the other weekend! Simply amazing getting these machines in the 11's!
Hi Mike.
I'm trying to get an update on the lead time for the remaining brackets.
And that was Nick (loudexploder) that broke the van record over the weekend. I had broke it just 20 days previously. But now Nick is Top Van 🥇. It is incredible to think the 2 fastest vans are in the 11.6's, until someone pushes it out further!
Sent from my KB2005 using Tapatalk
Re: 36-1 wheel weld to the crank service. Gathering interest.
Quote:
Originally Posted by
wheming
Hi Mike.
I'm trying to get an update on the lead time for the remaining brackets.
And that was Nick (loudexploder) that broke the van record over the weekend. I had broke it just 20 days previously. But now Nick is Top Van 🥇. It is incredible to think the 2 fastest vans are in the 11.6's, until someone pushes it out further!
Sent from my KB2005 using Tapatalk
‘Dumb question- is there an 87 4 bolt crank pulley solution available?