Log TI PCV 'T'

I need to replace the factory rubber PCV 'T' elbow/grommet/whatchamacallit on a log TI engine in my brother's GLH Turbo. It has hardened and cracked and is seeping oil making a mess. The OEM part is no longer available. Has anybody ever recreated this piece using something like 1/2" copper sweat fittings? I'm hoping to fix it while still using the stock PCV valve in the stock location.

Quote:

---

Originally Posted by iTurbo

I need to replace the factory rubber PCV 'T' elbow/grommet/whatchamacallit on a log TI engine in my brother's GLH Turbo. It has hardened and cracked and is seeping oil making a mess. The OEM part is no longer available. Has anybody ever recreated this piece using something like 1/2" copper sweat fittings? I'm hoping to fix it while still using the stock PCV valve in the stock location.

---

I used 1/2" copper fittings and it is fine now for the last 5 years.

Jeremy,
As you probably know, the Masi 16V uses the same PCV tee as the early T1 cars. Did you try Vintage Parts? That is where I bought some last. FYI, they were under $6 from VP a few years ago. Did you do a parts search using the part #4105733. Quick search shows some inventory on Ebay and Marty at Arizona parts claims to have 34 of them.
If others in the future are searching for the later T1 & TII PCV part #, that is 4387568.
Todd

https://www.ebay.com/itm/Genuine-Mop...3/303325830891

Thanks guys! I'm going to try picking up a few on eBay while I can still find them.

Todd, yup I did manage to find a NOS one on eBay a while ago, but that went onto my Shelby Lancer Maserati 16v project!