Re: DriveShaft Shop Axles - Group Buy
Quote:
Originally Posted by
TFmech
I am in for a set of L bodys A568 with obx
Sent from my SM-N960U using Tapatalk
added
1. Karlak G - Confirmation received!
2. turbo2point2 L-body - Confirmation received!
3. jcronk23 - G Body - Confirmation received!
4. ajakeski - Minivan/Auto (need to discuss/check length) - Confirmation received!
5. Pat - L body - Confirmation received!
6. eairgood - L body - Confirmation received!
7. wheming - Minivan/Auto - Confirmation received! (pending price)
8. 2.2mopar - L - 2 sets - Confirmation received!
9. Pat (for Barry Miles) - G body - Confirmation received!
10. CornflakesGLHT (Pascal Labelle) - Lbody - 568 w/quaife - Confirmation received!
11. morrispower - Minivan/stick (measurements - how about now? LOL) - Confirmation received!
12. csxtra - P body - Confirmation received!
13. nvysion - P body w/ 1992 A568 (PM sent for infos) - Confirmation received!
14. Cobrat93 - L body - L5 - A555 - Confirmation received!
15. Microreo - J Body Auto - Confirmation received!
16. Shmedley - L body - A555/520 OBX
17. Lynx853 - L body L5 a568 w/quaife
18. 85shelbycharger - L body L5 a568 w/quaife
19. bgbmxer - L-body A568 OBX
20. contraption22 - L body Peloquin
21. TurboK - K 413 peloquin
22. 69viper - J 413 peloquin
23. Vango - S 523 Traction squared
24. Wasteland Warrior AA - 568 Traction squared
25. RyanTymitz - S 523 Traction Squared
26. Nvegola - K - 555 Traction Squared
27. TFmech - L - 568 OBX
Re: DriveShaft Shop Axles - Group Buy
Is this still going on? If so,
G-Body - L5 555 Quaife
Re: DriveShaft Shop Axles - Group Buy
Quote:
Originally Posted by
krut
Is this still going on? If so,
G-Body - L5 555 Quaife
Yes it is, and I've been talking with them after a long hiatus so hoping we can get it figured out.
1. Karlak G - Confirmation received!
2. turbo2point2 L-body - Confirmation received!
3. jcronk23 - G Body - Confirmation received!
4. ajakeski - Minivan/Auto (need to discuss/check length) - Confirmation received!
5. Pat - L body - Confirmation received!
6. eairgood - L body - Confirmation received!
7. wheming - Minivan/Auto - Confirmation received! (pending price)
8. 2.2mopar - L - 2 sets - Confirmation received!
9. Pat (for Barry Miles) - G body - Confirmation received!
10. CornflakesGLHT (Pascal Labelle) - Lbody - 568 w/quaife - Confirmation received!
11. morrispower - Minivan/stick (measurements - how about now? LOL) - Confirmation received!
12. csxtra - P body - Confirmation received!
13. nvysion - P body w/ 1992 A568 (PM sent for infos) - Confirmation received!
14. Cobrat93 - L body - L5 - A555 - Confirmation received!
15. Microreo - J Body Auto - Confirmation received!
16. Shmedley - L body - A555/520 OBX
17. Lynx853 - L body L5 a568 w/quaife
18. 85shelbycharger - L body L5 a568 w/quaife
19. bgbmxer - L-body A568 OBX
20. contraption22 - L body Peloquin
21. TurboK - K 413 peloquin
22. 69viper - J 413 peloquin
23. Vango - S 523 Traction squared
24. Wasteland Warrior AA - 568 Traction squared
25. RyanTymitz - S 523 Traction Squared
26. Nvegola - K - 555 Traction Squared
27. TFmech - L - 568 OBX
28. krut - G - 555 Quaife
Re: DriveShaft Shop Axles - Group Buy
:eyebrows::eyebrows:carbon fiber:eyebrows::eyebrows:
Re: DriveShaft Shop Axles - Group Buy
Would the quaife axle shaft ends need to be trimmed?
Re: DriveShaft Shop Axles - Group Buy
Quote:
Originally Posted by
krut
Would the quaife axle shaft ends need to be trimmed?
I have the same question as well. As I’ve got a quaife in my daytoilet’s A568.
Sent from my iPhone using Tapatalk
Re: DriveShaft Shop Axles - Group Buy
Quote:
Originally Posted by
krut
Would the quaife axle shaft ends need to be trimmed?
Quote:
Originally Posted by
jcronk23
I have the same question as well. As I’ve got a quaife in my daytoilet’s A568.
Sent from my iPhone using Tapatalk
I don't think anyone has had to do that yet? If you do, it might be because the Quaife has a pin in the center of the bellvile washer stack
Re: DriveShaft Shop Axles - Group Buy
ask onerippinturbo2 if you have doubts
trimming axles for the quafie's was discussed <<way back somewhere
if I remember correctly it was only the passenger side that had to be trimmed , MAYBE, and at that about 1/4 inch only but exactly I'm not sure ..5/16 , maybe
someone once said the chunk should look like a metal bottle cap .. kinda
Re: DriveShaft Shop Axles - Group Buy
Quote:
Originally Posted by
Dr. Johny Dodge
ask onerippinturbo2 if you have doubts
trimming axles for the quafie's was discussed <<way back somewhere
if I remember correctly it was only the passenger side that had to be trimmed , MAYBE, and at that about 1/4 inch only but exactly I'm not sure ..5/16 , maybe
someone once said the chunk should look like a metal bottle cap .. kinda
I remember reading that. Just wanted to make sure that if I had these if I had to trim them out of the box so that I'm fully prepared
Re: DriveShaft Shop Axles - Group Buy
I've talked with some that had to cut PS axles (stock or DSS same) and other that haven't had to cut them. Not sure if they are running the A555/568 quaife or T350 quaife and also not sure if they took out the little pin in the middle of the belvile washer stack
Re: DriveShaft Shop Axles - Group Buy
fastasleep-L5-minivan A413/Peloquins
Re: DriveShaft Shop Axles - Group Buy
Re: DriveShaft Shop Axles - Group Buy
I got to change mine to a maybe. I got my hands on a set
Re: DriveShaft Shop Axles - Group Buy
Quote:
Originally Posted by
shmedley
I got to change mine to a maybe. I got my hands on a set
That's Ok...... I will probably be in for 2 sets.
Re: DriveShaft Shop Axles - Group Buy
Still getting the run-around... will call again this week...
Re: DriveShaft Shop Axles - Group Buy
Re: DriveShaft Shop Axles - Group Buy
is there a list I'm supposed to copy and add my info to ?
..-one set driver's side (pair of) for daytona -568
-with quaife though I doubt it makes a difference as one will never be in the diff
I do not want a long passenger side axle
Re: DriveShaft Shop Axles - Group Buy
Jon Trotter needs to be on this list.
Re: DriveShaft Shop Axles - Group Buy
Quote:
Originally Posted by
karlak
any news???
Not good news yet. now I have a bit of bandwidth after SDAC-29 I will reach out to DSS again
Quote:
Originally Posted by
Dr. Johny Dodge
is there a list I'm supposed to copy and add my info to ?
..-one set driver's side (pair of) for daytona -568
-with quaife though I doubt it makes a difference as one will never be in the diff
I do not want a long passenger side axle
They only sell them in sets (DS short + PS long) so this would be a special request. For equal length, what are you using for the intermediate axle? the stock u-joint yoke is a weak link
Quote:
Originally Posted by
ajakeski
Jon Trotter needs to be on this list.
true story
Re: DriveShaft Shop Axles - Group Buy
for now the factory intermediate piece will do
but I hope "Shadow" will share his one piece design or at least how he centered it ..
the flat drag strip might be ok for the long shaft but here I've noted long ago when I first did the equal length shafts in my turboed turismo the really round road crown stopped being an issue for me - and I'm not building a drag car so really hard launches with slicks aren't going to be happening here