Re: Should TU reproduce 005 and 006 style MP head gaskets?
i'd be down for at least 5 gaskets
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Quote:
Originally Posted by
Vigo
I dont care if they make more or not. Pat ran 11s on a new-style Felpro gasket without realizing it, if i remember correctly. Good enough.
I think it would be fair to say he is a cut above just about everyone here in attention to detail and achieving repeatable success because of it. You can make cork valve cover gaskets not leak if you try hard enough….
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Quote:
Originally Posted by
135sohc
I think it would be fair to say he is a cut above just about everyone here in attention to detail and achieving repeatable success because of it. You can make cork valve cover gaskets not leak if you try hard enough….
All respect due to Pat, he's not the only one to have success with the new style gasket.
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Guess this idea is a bust.
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Does Chrysler still sell the non-mopar performance one?
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Quote:
Originally Posted by
Johnny
Does Chrysler still sell the non-mopar performance one?
The regular and MP gaskets were the same gaskets but sold under different part numbers for warranty purposes. I purchased two regular gaskets and they were both marked as discontinued. The same gaskets purchased 3 years ago and there were plenty with no warning of impending cancellation. After the 005 was cancelled everyone rushed and bought the regular part number so its now gone.
Re: Should TU reproduce 005 and 006 style MP head gaskets?
I just looked up the 006 gasket today at work. There is a new superceded part number that ends in ab...They aren't available yet, but my guess is they will be available for purchase in the near future.
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Re: Should TU reproduce 005 and 006 style MP head gaskets?
5281065 is a gasket from Mopar that will work. But not that many out there.
Re: Should TU reproduce 005 and 006 style MP head gaskets?
I talked to Ed Peters and he told me he thinks the Cometic ones are the best.
Just a little pricy but just about like having a o-ringed system.
The part number (I think) is C5734-066
The -066 is the thickness of the gasket.
Re: Should TU reproduce 005 and 006 style MP head gaskets?
P4452006 supercedes to P4452006AB, first time i have ever seen this, but you can ONLY put a special handling order in on them, it isn't discontinued, and it is not priced, 41 sitting on order right now, no eta of course. Looks to me like Chrysler is waiting to see if enough pop up on order and they will get a batch, but again there is no pricing, that will probably depend on how many are ordered from the supplier, if any at all. The 005 is gone though. But looks like there is an 'inside' guy still left at Chrysler thinking about you guys lol.
So go down to your local dealer and get your name on a few and looks like they are getting a batch in if they get enough orders ;)
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Quote:
Originally Posted by
Johnny
I talked to Ed Peters and he told me he thinks the Cometic ones are the best.
Just a little pricy but just about like having a o-ringed system.
The part number (I think) is C5734-066
The -066 is the thickness of the gasket.
They are the best sealing but both head and block deck must be surfaced to the proper RA in order for this to happen. It's alot of extra work if you weren't planning on pulling the motor.
Chris-TU
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Oh sorry Chris didn't realize this was in your forum, I'm on tapatalk and just clicked new posts, remove if need be, just trying to help out, sorry again
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Quote:
Originally Posted by
JDAWG
Oh sorry Chris didn't realize this was in your forum, I'm on tapatalk and just clicked new posts, remove if need be, just trying to help out, sorry again
Not a problem. We already had the replacements on order so will add to our site and let everyone know when they are available to ship.
Chris-TU
Re: Should TU reproduce 005 and 006 style MP head gaskets?
I only have the one car, but I would be in for 3-4 gaskets. I like having extras laying around.
Re: Should TU reproduce 005 and 006 style MP head gaskets?
If this goes through I would be down for 3-4 gaskets.
Re: Should TU reproduce 005 and 006 style MP head gaskets?
Seems to have died. No wheres near enough
Re: Should TU reproduce 005 and 006 style MP head gaskets?
You can put me down for two 006...I'll help the cause!!