what knock sensor are you running. the ms3 shows 2 wires. can I run the stock 1 wire. also what is a preferred spot to install it. Im thinking of installing it in the factory location. any advice is appriciated
Printable View
what knock sensor are you running. the ms3 shows 2 wires. can I run the stock 1 wire. also what is a preferred spot to install it. Im thinking of installing it in the factory location. any advice is appriciated
you might be able to. youd have to use a signal return wire to the case of the sensor to complete the circuit.Quote:
Originally Posted by jackerman
i believe the MS3 knock system is built around the widerange 2 wire knock sensors like the bosch.
Brian
No, you can not use a knock sensor directly with Megasquirt.
You need a knock module before buying a sensor.
I use littleknockmeter with my Microsquirt. http://www.turbo-mopar.com/forums/sh...=1#post1131177
You can use this. https://www.diyautotune.com/product/...ck-module-kit/
Read the megasquirt manual!
Thanks guys