fs: Billet Vacuum blocks and Throttle Body flanges
Had these @ SDAC , will be bringing these to Carlisle
If you want it shipped probably be about $5
$25 on the vac. blocks , $20 on the flanges
I also have cast 2.5" alumn. elbows available for $20 ea.
standard 2.2/2.5/3.0/3.3/3.8 throttle flange with 60mm opening drilled and tapped for the factory studs 8mm
4.0L 60mm jeep throttle body flange again drilled and tapped 6mm
both are 1/2" thick
vac. blocks are .75" thick
1 piece billet alumn. construction
3/8" main feed port or 1/4" npt port on the opposite side
(1) 1/4" port and (4) 1/8" ports - if your using silicone hose the 1/8" will fit the 1/4" port if needed
http://www.turbo-mopar.com/forums/ph...langes-800.jpg
http://www.turbo-mopar.com/forums/ph...ges_3_-800.jpg
http://www.turbo-mopar.com/forums/ph...ges_2_-800.jpg
Re: fs: Billet Vacuum blocks and Throttle Body flanges
The vacuum blocks are friggin' awesome. I couldn't get over how cool they looked and if I'm not mistaken, they are made from ONE PIECE of aluminum! Excellent!
Re: fs: Billet Vacuum blocks and Throttle Body flanges
thanks
yes they are all one piece
no more threads, fittings and teflon tape hanging out everywhere
Re: fs: Billet Vacuum blocks and Throttle Body flanges
Save one of those vacuum blocks for me to pick up at Carlisle, Bruce!
Re: fs: Billet Vacuum blocks and Throttle Body flanges
Quote:
Originally Posted by
85shelbycharger
Save one of those vacuum blocks for me to pick up at Carlisle, Bruce!
+1 same with me, i'd also like the bracket for it as well.
Re: fs: Billet Vacuum blocks and Throttle Body flanges
sounds good guys, not a problem
The brackets on the way as soon as the cnc plasma cutter is running, but I'll see what I can do
Re: fs: Billet Vacuum blocks and Throttle Body flanges
I'm in for one of those vacuum blocks. Where will you be located at Carlisle?
Re: fs: Billet Vacuum blocks and Throttle Body flanges
Let us know if you have any vacuum blocks left after Carlisle. Those are friggin sweet. I like the attention to detail to make them a solid unit. VERY strong I am sure.
Re: fs: Billet Vacuum blocks and Throttle Body flanges
Quote:
Originally Posted by
neongary
I'm in for one of those vacuum blocks. Where will you be located at Carlisle?
spots 206 to 210 in the back row :D see you there
Re: fs: Billet Vacuum blocks and Throttle Body flanges
Quote:
Originally Posted by
neongary
I'm in for one of those vacuum blocks. Where will you be located at Carlisle?
same always, see below
Quote:
Originally Posted by
WickedShelby88
Let us know if you have any vacuum blocks left after Carlisle. Those are friggin sweet. I like the attention to detail to make them a solid unit. VERY strong I am sure.
thanks, I've got a few ideas, trying to do things differently
and yes, we banged the nipples off the work bench and dropped them from 6 feet without breaking
Quote:
Originally Posted by
briceturbosports
spots 206 to 210 in the back row :D see you there
what, are we renting the whole row :p
P207-P210 like hoagie said last row against the fence behind the car coral
Re: fs: Billet Vacuum blocks and Throttle Body flanges
cast 2.5" alumn. elbows available for $20 ea.
Interested in shipping one to V2P 5X4 B.C. Canada?
Re: fs: Billet Vacuum blocks and Throttle Body flanges
Quote:
Originally Posted by
boost geek
cast 2.5" alumn. elbows available for $20 ea.
Interested in shipping one to V2P 5X4 B.C. Canada?
sure
I'll get you a pic and a price on shipping this weekend
Re: fs: Billet Vacuum blocks and Throttle Body flanges
I'm interested in two of the vacuum blocks for pickup at Carlisle. Do you need payment in advance?
-Rob
Re: fs: Billet Vacuum blocks and Throttle Body flanges
Quote:
Originally Posted by
Rob_Mopar
I'm interested in two of the vacuum blocks for pickup at Carlisle. Do you need payment in advance?
-Rob
sweet, thanks
don't matter, I'm labeling and holding them for people
Re: fs: Billet Vacuum blocks and Throttle Body flanges
get me a price to 46225 for one of those nifty vac blocks please.
Re: fs: Billet Vacuum blocks and Throttle Body flanges
Ill grab one at carliz Bruce, that and the jacket! dont forget!
Re: fs: Billet Vacuum blocks and Throttle Body flanges
Quote:
Originally Posted by
briceturbosports
spots 206 to 210 in the back row :D see you there
Yep, nice talking to ya and great products. Can't wait to get the vacuum block installed.
Re: fs: Billet Vacuum blocks and Throttle Body flanges
Quote:
Originally Posted by
"Top Fuel" Bender
sure
I'll get you a pic and a price on shipping this weekend
I could still use an elbow for my Holset, still have any left? :eyebrows:
Re: fs: Billet Vacuum blocks and Throttle Body flanges
everyone's PM'D back
have a few more left
Re: fs: Billet Vacuum blocks and Throttle Body flanges
i would like to get a vacuum block from ya. i could pick it up or meet somewhere sometime.