looking for 88-89 turbo engine harness from a daytona, lebaron, shadow, newyorker etc. not from a minivan. (already have a 89 minivan turbo engine harness)
preferably around 100$
thanks
Brian
Printable View
looking for 88-89 turbo engine harness from a daytona, lebaron, shadow, newyorker etc. not from a minivan. (already have a 89 minivan turbo engine harness)
preferably around 100$
thanks
Brian
I think I have a 89 turbo shadow / manual trans harness. Bumper to bumper. I’ll see if I can dig it out.
have you seen an 88 K car smec harness?
it still used the bulkhead connector at the firewall - NOT the rubber gromit like the other 88's started doing
and fyi - IF you swap to the rubber gromit in the firewall the round hole you need to make is the same diameter as the square hole - IF you measure the square hole diagonally corner to corner
so essentually you need ro remove a D shaped piece on each side of the square 50 way bulkhead connector hole
yeah i have seen those.... they are hard to find nowadays. id love to find one of those.Quote:
Originally Posted by Dr. Johny Dodge
naah im not changing underdash connectors. :)
Brian
I can get u one from a stock 88 lebaron T1 auto, complete harness.
I have a 88 turbo z I'm going to be parting out. I want to sell the engine first as I would like to show the possible buyer that the engine runs. If you don't need it ASAP I could probably help you out.
Sent from my XT1254 using Tapatalk
Quote:
Originally Posted by glht_omni
i wanna try my LM to SMEC conversion first. so no rush. each of you, lemme know how much for each harness shipped to 14569. PM is fine. thanks.Quote:
Originally Posted by lengel
honestly, i like the idea of keeping the SMEC logic board in the passenger compartment even if the battery temp sensor isnt seeing the correct temp. for using an ostrich and preventing the SMEC logic board socket area from being exposed to water, the passenger compartment is great. i may use some wire to extend the battery temp thermistor from the board to near the battery for accuracy..
Brian
I can get n sell u the complete lebaron onw for $125 shipped including all the solenoids n relays n sensors that are connected to firewall n strut tower/fender walls. Even include the fuel injector clips.
88 k based lebaron SMEC unicorn harness? or j or h body lebaron?Quote:
Originally Posted by glht_omni
i guess i didnt realize what you might have been posting earlier lol. reading comprehension FTL.
Brian
It's a 2dr very body with T1 autoQuote:
Originally Posted by Aries_Turbo
very..... im guessing that autocorrect got you.... :)Quote:
Originally Posted by glht_omni
lemme know what it actually is :)
Brian
I have a harness from an 89 LeBaron 2.5 turbo I auto car. $100 shipped.
Sorry Brian, it's a 88 2.2 auto t1 convertible 2 dr lebaron
I've got an 88 J body harness that I had started to add a charge temp wire to. Are you coming to SDAC?
almost done with my 87 LM harness to SMEC conversion. if it doesnt work as expected, ill get back to you guys.
no im not going to SDAC this year.
thanks
Brian