Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Nice downpipe! 4"? Curious where you found the vband ring that meets the turbine housing? Looking good
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Now that sure looks familiar.
I have one just like that;
http://i121.photobucket.com/albums/o...ps71cf8d7e.jpg
Are you going to use the command valve to control boost?
If not, what direction are you going?
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Quote:
Originally Posted by
spooling
Nice downpipe! 4"? Curious where you found the vband ring that meets the turbine housing? Looking good
Yep 4" all the way to the dump.
Several venders sell the HE351 V-band ring. Bit of a piss off actually as it is used in more than just one application (I'm guessing) so the ID does Not match the HE351 properly. It's like an 1/8" smaller all the way around. Nice to find this out after paying 65.00 US + shipping for it!
Had to open it up a bit..........
- - - Updated - - -
Quote:
Originally Posted by
2POINT5TURBO
To control the Holset command valve, so Yes :)
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Quote:
Originally Posted by
Shadow
Being a 2.5l and knowing what Nick's goals are for the car, I Really wanted to have double the displacement in the plenum and this is Very close. I think I displace measured it down to 4.9l plenum. Either way, Really happy with how it turned out.
Really too bad you can't buy THIS version of the BMF "off the shelf" :( as it solves So many issues all at once.
I was asking for the same thing but it got justified away.:confused2:
The fact that you made it this way makes me proud!!
Great build Mr 2POINT5TURBO !! :clap:
Thanks
Randy
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Quote:
Originally Posted by
GLHS60
I was asking for the same thing but it got justified away.:confused2:
The fact that you made it this way makes me proud!!
Great build Mr 2POINT5TURBO !! :clap:
Thanks
Randy
Had to, lol I can't stand to let something that close slip through my fingers without even Trying! ;)
The most amazing thing so far is the out of boost response and power. Crisp Crisp, and you'd think you were 2-3lbs into boost the way it effortlessly moves the Daytona. Makes the car feel Light as a feather!
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
This thread is like seeing into the future! lol
I just LOVE IT!!! Great work guys. :thumb:
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Sweet:eyebrows: Now how long do we have to wait for a WOT vid?
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Quote:
Originally Posted by
2.216VTurbo
Sweet:eyebrows: Now how long do we have to wait for a WOT vid?
Quote:
Originally Posted by
2POINT5TURBO
5000km break in :)
I think what Nick meant to say is that the car is driving around "untuned" for WOT, but part throttle is fine.
We won't know what the lowest boost is going to be until it gets stepped on and that won't happen for a few more km's (not quite 5000, But it could be 5000 IF Nick Really wants it to be ;))
I think some confusion between when to switch to full synthetic got mixed up in there somewhere.
Still needs a catch can and there are a few other odds and ends that need doing and if everything checks out when there is nothing left to do, then it will be time to tune WOT :)
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
I want that car!! Exhaust plans after the DP, or is that it?
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Is it going to have an intercooled crank case breather system like on the Pressure Ratio Kings car??
Thanks
Randy
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Quote:
Originally Posted by
spooling
I want that car!! Exhaust plans after the DP, or is that it?
If Nick had his way, I think the 4" dump would be it lol, but Nick can chime in and correct me if I'm wrong. ;)
Quote:
Originally Posted by
GLHS60
Is it going to have an intercooled crank case breather system like on the Pressure Ratio Kings car??
Thanks
Randy
Something Very similar. :nod:
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Quote:
Originally Posted by
GLHS60
Is it going to have an intercooled crank case breather system like on the Pressure Ratio Kings car??
Thanks
Randy
Yeah but this one will have the infinitely adjustable crankcase timing option;)
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Quote:
Originally Posted by
2.216VTurbo
Yeah but this one will have the infinitely adjustable crankcase timing option;)
Dang! Again! How many times do I have to tell you................It's a Secret :blah:
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Haha oh you guys !, rob seems to have given me the best of both worlds a complete silent exhaust system with the option of unbolting and having an open downpipe for the track lol
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Re: 1988 Daytona Shelby 11 sec full body build thread * picture heavy *
Should have gone a little longer and walked around to the driver side and showed the vac @ idle. What's your vac, like 17-18"? I know the Charger is 16", but the 2.5's are going to produce a little more.