Air manifold and connectors for such pieces.

Hello again people, i'm in the market for an air manifold and the nipples connected to it, I have an 86 dodge omni and am rounding out getting it started, so i need the manifold and vacuum lines. Thanks for your input and advice. Awaiting your response. Errol.

I think FWD and TU sell kits for that. I know they used to sell the vacuum blocks. You can pick up the NPT fittings for them at Home Depot and the like.

Princess Auto have a selection of Air Manifolds if you have 1 locally.

Thanks
Randy



https://www.princessauto.com/en/sear...=air+manifolds

Thanks guys i appreciate the input!!

if you still have one of the original vacuum fittings off the manifold you have something to take with you to match up the thread

go to the auto parts store and buy a vacuum fitting with multiple ends on it - six should be more than enough locations on the fitting

save the cash for the vacuum block plus the fittings
save finding a place to mount the block and a way to route the lines

simply install the one fitting directly on the manifold and route the lines in a manner similar to the original version

vacuum lines are much easier to make fit keep secure and to work around if you follow the original design as they were engineered to fit into place, not just be added on top of everything

The V-6 cars have fittings that have 3,4, and 5 connections, they are steel and fit in the same threaded holes in the intake manifold.

I always just drill and tap all the ports I needed on the intake manifold.

http://thelostartof.net/tryingbe/dod.../Photo2159.jpg
http://thelostartof.net/tryingbe/dod.../Photo2197.jpg
http://thelostartof.net/tryingbe/dod...ust/pic048.jpg

Thanks guys your input is much appreciated. Thanks again