Reading old SMEC tune?

My Van was tuned years ago and I don’t have the tune file anymore, I’m going to start re-tuning it and install bigger injectors but would like to pull the old file for a backup just to have.

I got a new flash cable and pulled the tune with MPTune, when I try opening the tune I just keep getting the below error. Any ideas?

Also anyone good at remote tuning? I understand the basics but would rather pay someone for a proper tune.

https://uploads.tapatalk-cdn.com/202...69a75f1aa5.jpg

https://uploads.tapatalk-cdn.com/202...237058bffb.jpg


Sent from my iPhone using Tapatalk

who did the tune?

what system was the tune done with?

you need the original definition files for the tune unless it was based on a stock tune and definition file.

or you need someone with a disassembler to create a definition file for all the memory locations.

then you can at least copy the various tuned tables into a fresh tune.

Brian

Quote:

---

Originally Posted by Aries_Turbo

who did the tune?

what system was the tune done with?

you need the original definition files for the tune unless it was based on a stock tune and definition file.

or you need someone with a disassembler to create a definition file for all the memory locations.

then you can at least copy the various tuned tables into a fresh tune.

Brian

---

Okay thanks for the info, I don’t know what system was used originally. I am about ready to start the tuning process and figured before I do anything I should save the original file since I know it’s a good running file, just incase I had a problem.

I guess I’ll just cross my fingers it goes good the first time I select a tune and flash


Sent from my iPhone using Tapatalk

the tune was done using MP tune v18.