WTB turbo drain back tube that presses into the block. I am assuming that all years and versions are the same size. PLMK. Thanks.
Printable View
WTB turbo drain back tube that presses into the block. I am assuming that all years and versions are the same size. PLMK. Thanks.
I am assuming that all years and versions are the same size
never assume anything what year is it???????
Common block. Don't know what year it is. '93-4 probably. The boss is there. I have to drill the hole so I don't think it matters.
It's an odd size, like 43/64's or something like that. Don't try to drill this by hand. You'll booger up the block almost for sure. Either that or injure your wrist trying. Your drilling diagonally through the block and the drill bit will want to really kick when breaking through the casting. Best left for a machine shop. One thing you could consider since you need to drill the hole, would be to drill it to a 1/2" NPT pipe thread and just put on a 1/2" to 5/8 barb fitting. Then just run a hose from drain tube to fitting, eliminating the piece your looking for. Another solution would be to put in NPT pipe to AN fitting and plumb it in that way.Quote:
Originally Posted by gkcooper