What have I done? 84 E Class
Re: What have I done? 84 E Class
I was just going to say, that Mitsu-junk has to go! But it sounds like it's already gone! :-)
Otherwise it's a gem! Looks super-clean and begging for turbo transplant!
Mike
Re: What have I done? 84 E Class
Re: What have I done? 84 E Class
but you've now got the largest rad that fits
a simple extension tube in the top hose makes it fit the 2.2 / 2.5 easy
I used a section of 70's vacume cleaner tube when I put the 2.6 rad in my first daytona
Re: What have I done? 84 E Class
Is the best plan for a 2.5 swap to find an 88 New Yorker? I do have a caravan harness available but would like to get a whole car to make sure I have everything I need.
Re: What have I done? 84 E Class
Whole car for a driveline swap is ALWAYS the best idea, most of the time it's cheaper than piecing everything out as well. CLean car, I see why you couldn't resist:eyebrows:
Re: What have I done? 84 E Class
mmm yeah
I think you might have a harness issue as I seem to remember the 84's still used a 40 way b-h connector as opposed to a 50 way
I could be wrong but if not it's probably a good time to put that thought out there
the 88 harness would have the 50 way just like an 86 or 87 but uses a smec instead of the lm/pm
adding a later model dash harness might yet again cause issues as the rest of the body wireing might well not match to
I know 84 vs 85 door wireing it totally different at the corners of the dash in a daytona so I wouldn't be suprised if that carried over to the K's as well
- and in 86 mopar started using different connectors in a lot of locations
Re: What have I done? 84 E Class
Quote:
Originally Posted by
Dr. Johny Dodge
mmm yeah
I think you might have a harness issue as I seem to remember the 84's still used a 40 way b-h connector as opposed to a 50 way
I could be wrong but if not it's probably a good time to put that thought out there
the 88 harness would have the 50 way just like an 86 or 87 but uses a smec instead of the lm/pm
adding a later model dash harness might yet again cause issues as the rest of the body wireing might well not match to
I know 84 vs 85 door wireing it totally different at the corners of the dash in a daytona so I wouldn't be suprised if that carried over to the K's as well
- and in 86 mopar started using different connectors in a lot of locations
This is a question that needs an answer. Does anyone know for sure? Guess I can take a peek under the dash when I get the car home.
Re: What have I done? 84 E Class
Nothing a set of tin snips and a bit of silicon sealer couldn't remedy!
Seriously, if all that's in the way is a larger hole in the firewall...
Mike
Re: What have I done? 84 E Class
needs a 3.0 and a holset..