Somewhere in the 90s a guy building a charger for dirt track told me the combination to make a 2.7L out our engines. I didn't fully understand at the
jpcturbo 04-17-2025, 04:05 PMI used a dial calipers. I rotated the crank to align the flywheel mark for #1 with the zero mark on the timing window which required a couple of back
jeff1234 04-16-2025, 09:43 AMHow are you measuring the stroke? I would think the piston rocking in the bore could account for a least little of that depending on the rings, etc.
cordes 04-15-2025, 06:38 PM.070 difference between a 2.2 stroke at 3.622 and my measurement of 3.691 of the stroke measured is alot to account for, so i disagree. Perhaps someone
jeff1234 04-14-2025, 11:05 PM
· · · Car Intros and Concepts 98 photos 0 comments |
|
· · · Member Galleries 16883 photos 255 comments | |
· · · 1993 Dodge Daytona IROC R/T parts car 17 photos 0 comments | |
· · · Member Galleries 16883 photos 255 comments | |
· · · FWD Mopar Freakshow 47 photos 6 comments | |
· · · Member Galleries 16883 photos 255 comments |
Re: Mysterious stroke/ crankshaft
Unfortunately we are just reassembling the top end and turbo assembly after replacing the 782 head. It was Cracked around the valve guide towards the
jeff1234 04-18-2025, 08:49 AM