Turbo Matrixc graph

[Russ Jerome]

Neat little graph:
http://www.turboneticsinc.com/turbomatrix.htm

[The S is Silent]

He he. I just noticed something. Under the assumptions for the basis of the power predicitons...

"Polished Compressor Housings"

:thumb: If you didn't get the polished housing...you're only going to make 325 hp on our 2.5L

[stampederunner]

And that says a S60 is only good for 250 h.p.

[The S is Silent]

And that says a S60 is only good for 250 h.p.

That's at less than 10 psi of boost...so that sounds about right.

[Russ Jerome]

Yup and from known power/trims of our members it is pretty
accurate.

[cordes]

Thanks for posting that russ. It is pretty helpful, and nice to be able to search this forum now rather than try to trak it down on turbonetics somewhat difficult to navigate site.

[Russ Jerome]

There new site has not been up that long, reload your browser or
do a new search if your still looking at the old site:
http://www.turboneticsinc.com/

The old site has stuff laid out a little easier (for me but I am slow):
http://www.turbocharged.com/catalog/Default.htm