Overhead display wont read temp.

[Dave]

My overhead display will show my direction that I'm traveling but for temperature it just says SC. What does that mean?

[JDAWG]

soooo cold? I dunno, you may need and ambient tempreature sensor. THey change connectors on it so you have to get a new connecctor and sensor but like $20 for the whole shebang.

[Dodge Aries K]

WHen it says SC it means that it's getting a false signal or there is a short. Look right behind the grille... unplug and clean the hell out of that plug and the connector and try again.

[Dave]

K, thanks guys.

[JDAWG]

Bryan if you need a new one PM me.

[Dave]

JDAWG you still got one?? I began really digging into it today. It's very intermittent. It will flash to SC and flash the temperature, the temperature will rise in fall in 20* increments then flash to SC again. I replaced the ground, checked all the wiring and cleaned the connections. The problem may be in the sensor itself or in the wiring by the display.

I'll try the sensor first. I'm still wanting to install it into my upper intercooler pipe to read out the air charge temp all the time.