PDA

View Full Version : Identifying CSXT coil springs



Anonymous_User
12-05-2006, 08:20 PM
How can I tell if my CSXT has the proper coil springs? The struts and shocks have been replaced with crappy parts store stuff.

ShelbyMotorsports
12-05-2006, 08:37 PM
You can see if the Chrysler assembly tag is still on them. FYI the springs are the same as any other T-1 Shadow.

Anonymous_User
12-05-2006, 09:58 PM
In the suspension department, the stock springs are replaced with high-rate, shortened ones which lower ride height by .75 inch; they are wrapped around Monroe Formula GP shocks/struts. The tubular rear anti-roll bar is replaced by a larger, solid one. The brakes deserve special attention: they are genuine four-wheel discs with the rears (Kelsey-Hayes 10.6" solid discs) adapted from Dodge's Daytona Shelby Z. And finally, Shelby mounts 205/50VR-15 Goodyear Gatorbacks on Shelby Centurion II wheels (slightly different from those on the 87 GLHS), seen below.



from

http://www.xmission.com/~dempsey/shelby/sheldod6.htm