86daytonat_top
11-06-2006, 04:28 PM
Parts were for my 86 Daytonas:
Shelby LancerC/S Steering wheel w/ horn button – spokes need to be refinished $110
early 80's Mustang hood scoop - $60
'90 BOV and 2.25" hardpipe - 17 psi $30
Mopar A/C compressor – less than 1,000 miles - $150
T-Top latch covers – gray, no cracks - $25
G-valve - $30
3” SW (custom made) - $225
3” DP - $100
3” cat - $50
3” cat back pipes - $135
+20s (new in the package) - $120
3-bar MAP - $50
S/S turbo lines - $75
AFPR (black one FWDP sells) - $60
Vacuum block (blue, no barbs) - $26
87 Stage II computer (P5249671) - $65
52mm TB - $40
89 2.5 TI SW with 4-wire O2 - $25
Amateur ported T2 exhaust man - $50
T2 man (non-ported) - $30
89 Turbo head, 1,000 miles, new valves and cam seals, will include new 11mm head bolts - $190
89 C/S 2.5 TI block – 0 miles, re-honed, new pistons (ceramic top, anti-slip coating on sides, 10/10 crank, new Mopar rings, new main bearing, new int shaft bearings, to pick up tube, balance shafts removed and oil hole plugged, lower gasket kit, block is painted black, oil pan needs to be painted, I will include all accessory brackets and pulleys, complete minus head - $350
84-86 Daytona/laser nose including headlight panel - $100
DS T-Top door, no rust, has light damage, hammer and dolly should fix $25
1-piece gasket Turbo V/C (partially stripped) - $25
1-piece cast TBI VC with shield - $40
TBI shield - $25
5 spd black console - $50
86 555 shifter cables $25
86 shifter with know - $25
89 C/S 2.5 TI engine harness - $50
2.5 TI air box
6.5 crab wheel, damage around log hole - $10
86 L&R tail lights with badging - $35 ea
Lot of black and gray trim pieces, let me know what you are looking for.
Prices do not include shipping. I will post more as I find it. Paypal preferred.
Thanks,
Don
Shelby LancerC/S Steering wheel w/ horn button – spokes need to be refinished $110
early 80's Mustang hood scoop - $60
'90 BOV and 2.25" hardpipe - 17 psi $30
Mopar A/C compressor – less than 1,000 miles - $150
T-Top latch covers – gray, no cracks - $25
G-valve - $30
3” SW (custom made) - $225
3” DP - $100
3” cat - $50
3” cat back pipes - $135
+20s (new in the package) - $120
3-bar MAP - $50
S/S turbo lines - $75
AFPR (black one FWDP sells) - $60
Vacuum block (blue, no barbs) - $26
87 Stage II computer (P5249671) - $65
52mm TB - $40
89 2.5 TI SW with 4-wire O2 - $25
Amateur ported T2 exhaust man - $50
T2 man (non-ported) - $30
89 Turbo head, 1,000 miles, new valves and cam seals, will include new 11mm head bolts - $190
89 C/S 2.5 TI block – 0 miles, re-honed, new pistons (ceramic top, anti-slip coating on sides, 10/10 crank, new Mopar rings, new main bearing, new int shaft bearings, to pick up tube, balance shafts removed and oil hole plugged, lower gasket kit, block is painted black, oil pan needs to be painted, I will include all accessory brackets and pulleys, complete minus head - $350
84-86 Daytona/laser nose including headlight panel - $100
DS T-Top door, no rust, has light damage, hammer and dolly should fix $25
1-piece gasket Turbo V/C (partially stripped) - $25
1-piece cast TBI VC with shield - $40
TBI shield - $25
5 spd black console - $50
86 555 shifter cables $25
86 shifter with know - $25
89 C/S 2.5 TI engine harness - $50
2.5 TI air box
6.5 crab wheel, damage around log hole - $10
86 L&R tail lights with badging - $35 ea
Lot of black and gray trim pieces, let me know what you are looking for.
Prices do not include shipping. I will post more as I find it. Paypal preferred.
Thanks,
Don