36-1 Trigger Wheel Crank Pulley Adapters

[wheming]

Looks like I'm getting closer in my quest to being able to provide these.
Been working with a local engineer to help design an adapter to mount a 36-1 wheel to the crank pulley for aftermarket ECU conversions.
The adapter will have bolt patterns for the DIYAutotune 36-1 wheels (both the ~6" and ~8"), as well as the Ford pattern 36-1 wheels (the black one in the photos).
The adapter will fit both the FM style underdrive pulley and the factory pulley. Fits with A/C.
Should work with non-A/C pulley, but will be further out from the edge of the pulley, but that would give you clearance to use the smaller trigger wheel even with the factory diameter pulley.

Pictured is the printed prototype. Going to order a working machined prototype soon, to test. I will be test fitting the printed one to the car to check, but we have a couple adjustments already made for the machined prototype.
Going to try to target about $120 with anodizing and new crank pulley bolts.
Depending on numbers, we might be able to get it done a bit cheaper.

Anyone interested in being part of a group buy, please reply here if you want in. Feel free to share. Also if you prefer anodized Black or Clear.
(Majority will win here.)
We are still several weeks out from making an order, but trying to get an idea of interest to better firm up pricing.https://uploads.tapatalk-cdn.com/20210606/dfbd91c0494c62fbb7ffc7a19483a92e.jpghttps://uploads.tapatalk-cdn.com/20210606/2dbb97f94fa0f075fa93a9adc18f3a4f.jpghttps://uploads.tapatalk-cdn.com/20210606/899944a5d9ae51b9c2213593e7bdd230.jpghttps://uploads.tapatalk-cdn.com/20210606/b02f283e5e3e32d7e02a52787c6ff717.jpghttps://uploads.tapatalk-cdn.com/20210606/7ee24f580fe0a10c8174360186a51c17.jpg

Sent from my ONEPLUS A6000 using Tapatalk

[wheming]

Pictured is the printed model adapter nested in the underdrive crank pulley and the stock crank pulley.
This wheel is 6.25" or something like that. With the factory crank pulley (and A/C) you'd have to use the 8" wheel.
If no A/C, and the A/C pulley section was removed, you should have clearance to use this wheel pictured.https://uploads.tapatalk-cdn.com/20210606/e87b602126c83b20e39ad71d6d895959.jpghttps://uploads.tapatalk-cdn.com/20210606/f40b2037d039df7f788c8e1bad9deb33.jpg

Sent from my ONEPLUS A6000 using Tapatalk

[Reaper1]

NICE! I am certainly interested when you get them made!

[krut]

Put me down for one
K

[Kevin_Hemenway]

I would like one also probably two

[Aries_Turbo]

im interested in 1

Brian

[chromguy]

please add one for me

[Loudexploder]

I need one, when will these be done?

[wheming]

I need one, when will these be done?This is the latest update:
I was still waiting on 2 quotes, but have not heard from those shops, so I will pick from the 2 shops I have received a quote.

Before we can take formal orders, we need to machine a prototype for testing.

I have been working alot of extra at my real job, but have still been trying to keep this moving. I want to at least fit the printed prototype on my car to check for any issues also before we get into producing any.

Pricing looks like it will either be on target or just under. I will know more once we make some final calculations. I'm targeting August to get these produced, if there are no hold-ups with testing the prototype.

Sent from my ONEPLUS A6000 using Tapatalk

[Loudexploder]

Awesome put me down for one


Sent from my iPhone using Tapatalk

[Loudexploder]

I do wonder if this will work with the Holley wheel? Im planning to run Holley Terminator on the van.


Sent from my iPhone using Tapatalk

[wheming]

I do wonder if this will work with the Holley wheel? Im planning to run Holley Terminator on the van.


Sent from my iPhone using TapatalkMessage me a picture or link to the wheel you are thinking.

Sent from my ONEPLUS A6000 using Tapatalk

[minigts]

Put me down for one Wayne. I only have the stock pulley so I'm guessing I would need the 8" one?

[wheming]

Put me down for one Wayne. I only have the stock pulley so I'm guessing I would need the 8" one?Jon, Does your pulley have the A/C pulley?
I don't have a non A/C crank pulley to show the example, but I think it should work fine for non A/C and using the smaller 36-1 wheel, since there should be adequate clearance for the sensor. If not, then yes the larger 8" wheel would be needed.

Sent from my KB2005 using Tapatalk

[minigts]

All the pullies I own have the AC track, so the 8" wheel is what I would need, I'm guessing.

[wheming]

All the pullies I own have the AC track, so the 8" wheel is what I would need, I'm guessing.That would be one option.
Also, if you don't have an A/C compressor, I hear it is possible to seperate the A/C pulley section from the other half.

Sent from my KB2005 using Tapatalk

[wheming]

We are ready to take deposits so we can start manufacturing these.

https://sites.google.com/view/wheming

Sent from my KB2005 using Tapatalk

[minigts]

Paid, thanks Wayne :thumb:

[wheming]

Paid, thanks Wayne :thumb:Got it!
Thanks Jon!

Sent from my KB2005 using Tapatalk

[Yost]

Paid Today!

Kevin

[Reaper1]

Updated on FB a while back, but threw down for 2.

[wheming]

UPDATE 8/15/2021:
Anyone else interested in this Group Buy please get your deposits in by Friday 8/20/21. Materials are being ordered based on deposits.

And thank you to those that have already paid a deposit!

Sent from my KB2005 using Tapatalk

[Loudexploder]

Paid!!!

[wheming]

Thank you to the 30 Group Buy participants who paid deposits for 38 adapters!
The numbers have been communicated to our Canadian manufacturer, and material is being ordered!

Sent from my KB2005 using Tapatalk

[Comp461]

I will be using the Holley ECM. This looks wonderful. I had to build one for my Duramax Diesel when I went to a NIRA ECM.


One question on the 2.5 platforms. In NHRA stock Eliminator you are not allowed to run a crank trigger unless there is currently one they. Excuse my ignorance, I have yet to put my hands on one of these engines. Have a complete car on the way. I Will be running it in Stock Eliminator when my Jr dragster driver ages out. She has a few months left. I am trying to make the Divisional race in 3 weeks.

- - - Updated - - -

I will be using the Holley ECM. This looks wonderful. I had to build one for my Duramax Diesel when I went to a NIRA ECM.


One question on the 2.5 platforms. In NHRA stock Eliminator you are not allowed to run a crank trigger unless there is currently one they. Excuse my ignorance, I have yet to put my hands on one of these engines. Have a complete car on the way. I Will be running it in Stock Eliminator when my Jr dragster driver ages out. She has a few months left. I am trying to make the Divisional race in 3 weeks.

[minigts]

I will be using the Holley ECM. This looks wonderful. I had to build one for my Duramax Diesel when I went to a NIRA ECM.


One question on the 2.5 platforms. In NHRA stock Eliminator you are not allowed to run a crank trigger unless there is currently one they. Excuse my ignorance, I have yet to put my hands on one of these engines. Have a complete car on the way. I Will be running it in Stock Eliminator when my Jr dragster driver ages out. She has a few months left. I am trying to make the Divisional race in 3 weeks.

- - - Updated - - -

I will be using the Holley ECM. This looks wonderful. I had to build one for my Duramax Diesel when I went to a NIRA ECM.


One question on the 2.5 platforms. In NHRA stock Eliminator you are not allowed to run a crank trigger unless there is currently one they. Excuse my ignorance, I have yet to put my hands on one of these engines. Have a complete car on the way. I Will be running it in Stock Eliminator when my Jr dragster driver ages out. She has a few months left. I am trying to make the Divisional race in 3 weeks.

What was the question?

[cordes]

I will be using the Holley ECM. This looks wonderful. I had to build one for my Duramax Diesel when I went to a NIRA ECM.


One question on the 2.5 platforms. In NHRA stock Eliminator you are not allowed to run a crank trigger unless there is currently one they. Excuse my ignorance, I have yet to put my hands on one of these engines. Have a complete car on the way. I Will be running it in Stock Eliminator when my Jr dragster driver ages out. She has a few months left. I am trying to make the Divisional race in 3 weeks.

- - - Updated - - -

I will be using the Holley ECM. This looks wonderful. I had to build one for my Duramax Diesel when I went to a NIRA ECM.


One question on the 2.5 platforms. In NHRA stock Eliminator you are not allowed to run a crank trigger unless there is currently one they. Excuse my ignorance, I have yet to put my hands on one of these engines. Have a complete car on the way. I Will be running it in Stock Eliminator when my Jr dragster driver ages out. She has a few months left. I am trying to make the Divisional race in 3 weeks.

Welcome to the site. There isn't a crank trigger on our engines, in stock form if that's what you're asking. They use a hall effect pickup under the distributor cap, and that's it.

[Aries_Turbo]

the TIII dohc 2.2 in the spirit R/T uses a crank trigger. the 8v stuff, not so much.

Brian

[cordes]

the TIII dohc 2.2 in the spirit R/T uses a crank trigger. the 8v stuff, not so much.

Brian

Great catch, Bucar. I always forget about that since I've never owned a TIII car. Distributors for life!

[Aries_Turbo]

one good thing about the distributor setup in our cars is that it keeps the motor from grenading if the intermediate shaft gears that drive the oil pump shear off because the engine stops running.

for those going to crank triggers, use the distributor pickup wheel and a sensor to tell the new ecu what is cyl #1 and if the ecu loses sync, have it shut down.

brian

[Dr. Johny Dodge]

in the middle lane of a multi lane highway .. that ain't as great an idea as it might seem...

direct connection had an oil pressure activated ignition kill switch.. great at the track .. not so much so with a tractor trailer up your butt

[wheming]

Got some finished machining pics from DJ Elford at Elford Racing. The adapters are ready to go for anodizing.

Also, we are going to design a trigger sensor mount to work with the Brian Slowe designed trigger sensor bracket, for using this adapter. I would like to have those available to ship together. But that would put delivery to about mid-November due to other production commitments of the manufacturer.https://uploads.tapatalk-cdn.com/20210928/123528cbc2525766fc8bffdab08cfc53.jpghttps://uploads.tapatalk-cdn.com/20210928/b20ecf722a35733885a8f06971a21084.jpg

Sent from my KB2005 using Tapatalk

[minigts]

Man those look great!

[Aries_Turbo]

do you have a particular sensor you are going to design the bracket around?

Brian

[Loudexploder]

Does Brian have the sensor mounts?


Sent from my iPhone using Tapatalk

[wheming]

do you have a particular sensor you are going to design the bracket around?

BrianI plan to use the Cherry sensor.
But apparently alot of sensors are the same diameter.
DJ is going to work out the sensor mount based on Brian's designed part, and there should be some built in adjustment to fine tune locating the sensor.
Does Brian have the sensor mounts?


Sent from my iPhone using TapatalkAt the time I started this group buy, he was out of stock. But he had already discussed with his machinist to get a new batch. I gave him the heads up that our group was probably going to be about 50. Looks like I'll end up with 48 adapters total.

And I plan to do 50 sensor mounts, so I'll have enough if those buying adapters want our sensor mount.

Sent from my KB2005 using Tapatalk

[joelzip]

Add me to the list

[wheming]

UPDATE!
New sensor mount renderings added.
Progress continues.
Material on order for the sensor mounts. Working on pricing (but rough estimate should be NMT $30 with fasteners, probably less)
*Sensor not included

Anyone who got in on the group buy with deposit will get a special discount (TBD) as a thank you!
https://uploads.tapatalk-cdn.com/20211125/f4ce26d9e4d1529e5b69ae152549ea0c.jpghttps://uploads.tapatalk-cdn.com/20211125/fc639e9754b334af9e9a0725b2ebb7a2.jpghttps://uploads.tapatalk-cdn.com/20211125/82b7824ac75645cd56118fbeef869efc.jpg

Sent from my KB2005 using Tapatalk

[wheming]

Another anglehttps://uploads.tapatalk-cdn.com/20211125/23bd613d2d7e52c2408c4f31874397f6.jpg

Sent from my KB2005 using Tapatalk

[chromguy]

Looks Great!

[minigts]

Elf racing building this, right?

[wheming]

Elf racing building this, right?I think he goes by Elford Racing.
I can't verify if he is on Santa Claus' race team like you mentioned.

Sent from my KB2005 using Tapatalk

[wheming]

Received the printed prototype sensor mount for mock up testing.
I'll be working on getting mocked up on the van to test some clearances and measurements.
But, the printed one fits the SloweSpeed bracket great!
Plan to supply the sensor mount with a similar bolt with a locknut.

We are making progress slowly, but steadily.https://uploads.tapatalk-cdn.com/20211208/9ec13f0944fb0263a3af23934b128db0.jpghttps://uploads.tapatalk-cdn.com/20211208/d5fdab8a27ff17098b93a4d5c9abd945.jpghttps://uploads.tapatalk-cdn.com/20211208/0a8be830d6be1670388720b7f0e2fd25.jpghttps://uploads.tapatalk-cdn.com/20211208/4fc0067b807c9ccf43d3a40e70686d26.jpghttps://uploads.tapatalk-cdn.com/20211208/d826f841afc4857f4f3f34f63f42334d.jpg

Sent from my KB2005 using Tapatalk

[minigts]

My opinion, but two bolts would be a better idea than just one. If you were planning to have two, please disregard.

[wheming]

My opinion, but two bolts would be a better idea than just one. If you were planning to have two, please disregard.It's hard to see because of the lighting in that previous pic, but there is a surface of the mount that rides in the bracket groove.
The bolt is just to lock it in place, the machined surface keeps the mount from rotating.https://uploads.tapatalk-cdn.com/20211209/0066b660320c58766fe3016cd7850e7e.jpg

Sent from my KB2005 using Tapatalk

[wheming]

Work continues.
Checking with the printed prototype, and identified some slight design tweaks.

Should be ready for DJ to start up production.https://uploads.tapatalk-cdn.com/20211221/59d9f4b3246c8563c8e206164d10b9b5.jpghttps://uploads.tapatalk-cdn.com/20211221/2e9d3bdfd1da269397642e34fc75a83d.jpg

Sent from my KB2005 using Tapatalk

[wheming]

Don't know why it posted the same pic twice, when I had selected 2 different pics to attach .
https://uploads.tapatalk-cdn.com/20211221/4602afad9b186ede6835b2f751332a2f.jpg

Sent from my KB2005 using Tapatalk

[Aries_Turbo]

hmmm that looks great but doesnt look all that daily driver friendly.... rocks, gophers, birds, etc could leave you on the side of the road.

I guess a guard will be in order.

Brian

[cordes]

It looks like the stock shield should fit?

[wheming]

It looks like the stock shield should fit?I didn't try it, but the van shield might be different than the car covers anyway.

Sent from my KB2005 using Tapatalk

[Dr. Johny Dodge]

dosen't the big plastic shield under the alternator & waterpump go all the way back under the crank pulley too?

[wheming]

UPDATE!

Taking deposits now for anyone interested in getting the SloweSpeed Crankshaft Trigger Bracket.

The trigger sensor mount designed by Elford Racing was made specifically for Brian's bracket design. So we have partnered to make these available to anyone interested in using this bracket and mount arrangement. Quantity is limited, but we will take a deposit and make sure we meet the need for anyone wanting one.

For more details, and to make your deposit to secure your order of the bracket, check out the updated product website.

https://sites.google.com/view/wheming/home

Production is underway for the trigger sensor mounts. When I have some new pictures, I will post.

Thank you for your interest, and your patience.

[Aries_Turbo]

deposited....

also.... you know of a place that has that sensor in stock? it appears to be backordered everywhere.

Brian

[wheming]

deposited....

also.... you know of a place that has that sensor in stock? it appears to be backordered everywhere.

BrianDamn.
I had got mine from diyautotune some time ago.

Sent from my KB2005 using Tapatalk

[Aries_Turbo]

yeah they are out of stock right now.

[Aries_Turbo]

.... and this website says that they are discontinued..... https://www.rapidonline.com/cherry-gs100502-anodized-hall-effect-gearspeed-sensor-m12-1-thread-with-lead-63-4658

Brian

[Aries_Turbo]

this site may have some.

https://export.rsdelivers.com/product/zf/gs100502/zf-npn-hall-effect-sensor-switching-current-25-ma/7659328

[wheming]

Digikey had listed them, but looks like the inventory is low too.

I could try to place an order to cover those interested. Maybe getting an order of a few dozen or 50 of them would have better luck getting filled.

Sent from my KB2005 using Tapatalk

[wheming]

Sensor mount work in progress...
https://uploads.tapatalk-cdn.com/20220108/64d5673b531fc5a56ebddb588c8d8f96.jpg

Sent from my KB2005 using Tapatalk

[wheming]

More sensor mount picshttps://uploads.tapatalk-cdn.com/20220109/83ae4446bbc4b69afcec8deef14a681b.jpghttps://uploads.tapatalk-cdn.com/20220109/c94ea5804bd6dbae90c40b7ff8633f0e.jpg

Sent from my KB2005 using Tapatalk

[wheming]

And DJ just sent me a couple pics of some completed sensor mounts.
Looks great!
https://uploads.tapatalk-cdn.com/20220109/9f03cd04c13e0eb69f085e73c95216f6.jpghttps://uploads.tapatalk-cdn.com/20220109/a6e06a7c2751c64dc5ee4457fd593a4d.jpghttps://uploads.tapatalk-cdn.com/20220109/ca31fdddec232cc31a58ddc4ee520d1d.jpg

Sent from my KB2005 using Tapatalk

[wheming]

Just a few left to be made and then everything will be off to be anodized.https://uploads.tapatalk-cdn.com/20220109/fe527a3a8ac17f0cab23a0368cc9e7e9.jpg

Sent from my KB2005 using Tapatalk

[Fenderbass]

These look awesome 👏🏼 Can’t wait to see the finished product.

[wheming]

The wait is nearly over!

Got a pic of the finished anodized pieces from Elford Racing, and they look great!
https://uploads.tapatalk-cdn.com/20220119/de6ac5423d914b4682bd9f302418fbff.jpg

Sent from my KB2005 using Tapatalk

[wheming]

Pictured below are the completed parts!
The Cherry sensor is not included in any package combo but shown here to show compatibility. Other sensors may work as well. The nested nut groove was designed for extra clearance if you need to use the 8.25" trigger wheel.

I've got to get the mounting bolts sized and ordered, and I have already ordered the sensor mount screws & nuts.
I'm working on cleaning up the order page, so the group buy participants who paid deposits can pay their balances to complete their order.
I will post as soon as it is ready.

My plan is to start packing orders as soon as I return from Sick Week in FL.

For anyone who was not part of the group buy (no deposit paid) I will have a limited number of extras available while they last.
The package price for the trigger wheel adapter hub, trigger sensor mount, SloweSpeed bracket, and mounting hardware will be $250 + shipping

Let me know if there are any questions.https://uploads.tapatalk-cdn.com/20220128/7084e8f67d2811333f2ba83623c28666.jpghttps://uploads.tapatalk-cdn.com/20220128/a10c1a953bc9eef95736956699f962a8.jpg

Sent from my KB2005 using Tapatalk

[wheming]

I sent out the following email to everyone in the purchase group I have emails for:

UPDATE!
Thank you to all that have responded.
Anyone who responded with plans to use the Ford style trigger wheel and has completed payment, has either received their order, or it is in the process of shipping!


All the other adapters have been shipped back to the manufacturer to be corrected and anodized. These reprocessed adapters will appear as a more matte finish but are still anodized to protect the surface.
In order to be ready to ship out the orders as soon as the adapters are received back, please complete your orders by paying your outstanding balance at https://sites.google.com/view/wheming/home
This page has been updated, removing the Group Buy Enrollment deposits. This may cause some confusion for some of you. See below to find your applicable case for how to proceed. A good number of you receiving this email have not secured a SloweSpeed bracket by paying a deposit when I posted that update, so see below if you indeed want one. (I do not have enough SloweSpeed brackets for everyone who wants adapters because of that lack of response! We will however be able to get more.)




For those that paid a Group Buy Deposit on the Trigger Wheel Adapter AND paid a Group Buy Deposit on the SloweSpeed Crank Trigger Bracket: Pay your balances by scrolling down to the Group Buy Section and add the group buy balances due to your cart. (TIP: Add to the same cart, don't checkout after each cart pops up!) You may also add the Trigger Sensor Mount (there was no deposit required for this, simply add to cart if you would like one.)
For those that ONLY paid a Group Buy Deposit on the Trigger Wheel Adapter and If you ONLY want the Trigger Wheel Adapter; then you can simply pay your Group Buy Balance Due on the Adapter.
For those that ONLY paid a Group Buy Deposit on the Trigger Wheel Adapter and want either/both the SloweSpeed Crank Trigger Bracket or Sensor Mount: You will need to email me (reply to this email) telling me which additional items you want, and I will have to email you a PayPal invoice.
For Anyone that has not paid any deposit: The items have been combined into one package able to be purchased while supplies last. There were some extras, but may not be enough extra for any increased demand. So these will be while supplies last.
For anyone wishing to cancel their order: While the deposit should be non-refundable, I don't want to see anyone unhappy with doing business with me. So contact me and we can arrange a partial refund of your deposit.


And, if there are still any questions, just reply directly to me.


Best regards,
Wayne

[wheming]

The reworked trigger wheel adapters are on the way from our Canadian manufacturer!

I should be able to start shipping out orders next week to those who have paid!
They will go out in order of payment.

Also there are several people who have not completed their orders. So, please complete your orders to prevent your order from being cancelled. I've sent out multiple emails, and I don't have the desire to chase anyone down.
So don't put me in that spot.

Thank you to all that have diligently completed your orders!

Canadian orders will be split to drop ship from the manufacturer, and the remaining items will ship from the US. I have the SloweSpeed brackets and the fasteners here. International shipping is of course extra. The shipping payment already made will cover the shipping from DJ, but you will be contacted with the shipping quote from the US.


If there are any questions, please let me know!
https://uploads.tapatalk-cdn.com/20220310/0c8e2483676126d4cef97f1f16465933.jpg

Sent from my KB2005 using Tapatalk

[stereo]

PM sent

[wheming]

The first 20 or so orders have gone out. Some earliest due to using the Ford pattern wheels.
Now about 16 are on their way between yesterday and today.
Canadian customers have their orders enroute.
Tracking emails sent out via PayPal, so be on the lookout.

Of course, those who haven't completed their orders by paying their balances will not ship until those payments are received.

Anyone who plans to use a Ford pattern trigger wheel who has not received their order, please contact me.



https://uploads.tapatalk-cdn.com/20220318/a79f82382705f6dd6075478b472deba8.jpg

Sent from my KB2005 using Tapatalk

[wheming]

As of tomorrow, all paid orders (with the exception of one waiting on address verification) will have gone out for shipping!

There are a big handful of folks who have not completed their orders, or replied to my emails. So I will make one last email attempt, but I am not going to play nanny much longer.

I will also need to order more SloweSpeed brackets, as I only had enough for those that paid a deposit on them ahead of time.
So if you haven't completed your order, and you want one, please reply so I can place a request for another batch.


Sent from my KB2005 using Tapatalk

[Aries_Turbo]

got my stuff. thanks wayne

[wheming]

got my stuff. thanks wayneGood to hear!
And thank you

Sent from my KB2005 using Tapatalk

[minigts]

Got mine today after a dumb delay from the USPS. Nice work guys!!

65845

[wheming]

Got mine today after a dumb delay from the USPS. Nice work guys!!

65845There should be 2 bolts with Brian's bracket.
Are you missing one?

And thanks Jon!
Sent from my KB2005 using Tapatalk

[minigts]

There should be 2 bolts with Brian's bracket.
Are you missing one?

And thanks Jon!
Sent from my KB2005 using Tapatalk

If you are referring to the long aluminum bracket, the second one is not visible in the picture. There are two.

[wheming]

If you are referring to the long aluminum bracket, the second one is not visible in the picture. There are two.Yes.
Ok just making sure!

Sent from my KB2005 using Tapatalk

[Turbobillcanada]

deposited....

also.... you know of a place that has that sensor in stock? it appears to be backordered everywhere.

BrianI don't know if you found a sensor yet. I searched all over to find the cherry gs100502 sensor from auto tune. ( or atleast a long threaded version) everywhere is sold out ot backed ordered. Even auto tune said they don't know when it will be back in stock.

Just checked availability and ordered one from dakota digital for $80.00 seems identical, just renamed with there own model number.

Sent from my SM-G996W using Tapatalk

[wheming]

We have a customer testing a possible sensor option.
Once we know more it will be posted here.

Sent from my KB2005 using Tapatalk

[1985ShlbyChrger]

For anyone looking for a crank trigger sensor, alliedelectronics.com has them in stock. It's a ZF part GS100502. The picture on the website shows a screw on connector type sensor. This is NOT the correct picture. I ordered 2 of them to have on hand and they come with the 3 wires attached. Price is something like $40 each. Not a bad deal and they look like decent items. Just thought I'd toss it out there because i looked forever,this was the only place i could find them in stock and almost gave up as I thought it was the wrong sensor due to the picture.

Edit: I just checked and they are out of stock. They had over 100 of them when I ordered a few days ago. Guess that inventory went quickly. Didn't want to post until I had them in hand and verified they were the correct part. Little too late I guess.

[wheming]

Just to update everyone on the waiting list:

I spoke with Adam Lengel to see if there was any chance of getting the remaining SloweSpeed brackets orders completed before SDAC. Unfortunately he will not have the time yet to manufacture these.
I will update more when I have any new information from him.

So since there are pending orders waiting on these brackets, anyone who would like to cancel, simply contact me. As I previously stated, I have the adapters and the sensor mounts, but just waiting on more SloweSpeed brackets to be made.

In the future I will do things differently if there's any product ventures.

There still are some pending orders who have made deposits, but never responded to the various emails.
I will deal with those after SDAC.

If there are any questions or concerns, please contact me.

Thanks!

Sent from my KB2005 using Tapatalk

[wheming]

Geez, didn't realize this thread hadn't been updated since that last post! Sorry about that.
Everyone that ordered had their items delivered. We also donated 2 packages to SDAC to help the club.

For anyone that was watching this thread and did not get in on the group buy, I do have a few extra. Stock is limited, and I have no current plans to make any more.
I have them combined as a package deal, the crank pulley mounted wheel adapter, the SloweSpeed trigger bracket, and the sensor mount, with all the fasteners.
Package price is $250 +$17 shipping & insurance.
To view information and order:
https://sites.google.com/view/wheming?pli=1

Remember this is for common-block only. I've heard it may also work on tall-deck 2.5, but can't confirm.

Also, if you would like only part of what is in the package, I could possibly split if you only needed a wheel adapter. I would have to send an invoice to you for any partial orders.
I have a few extra of the ZF Electronics Cherry sensors (like in the 2nd pic), that are not part of the package, but if you needed one, I could sell some.https://uploads.tapatalk-cdn.com/20230501/a1b5abce402c36ea97d7f676105e0ba5.jpghttps://uploads.tapatalk-cdn.com/20230501/b8fe5c4ed4f26b89c0eb46e90a62ffde.jpg

Sent from my KB2005 using Tapatalk

[karlak]

I can use one.

[wheming]

I can use one.Check your messages please.

Sent from my KB2005 using Tapatalk