Exhaust

[mr glenn]

Any spirit 2.5 or 3 inch exhaust for sale.

[cordes]

Check out TU or FWD. They have exhaust systems which should get the job done.

[mr glenn]

Don't want to put a new one on body is not in good shape. I have an old 3 inch on there now from FWD

[cordes]

Don't want to put a new one on body is not in good shape. I have an old 3 inch on there now from FWD

If that's the case, then just get some 3" pipe and a 90* bend. Send it out in front of the driver's side front tire. I do this on cars and with a muffler where the cat would be the noise isn't too bad. I do have trouble with stock TII turbos on my NYer, as I didn't port the WG hole enough and it will overboost due to the ported exhaust manifold and SV. Other than that it has been great. I had that exhaust on my Shadow too. 304SS takes a long time to rot out.

- - - Updated - - -

I should add that I reuse the stock hanger where it normally turns back toward the bumper. I use one of the parts store hangers that clamps around the pipe. It actually works well.

[Aries_Turbo]

ive done this as well. works well.

Brian