PDA

View Full Version : socketing SMEC


WOP'R
10-21-2006, 05:23 PM
I didnt want to ask this there but I've had no success trying to become a member at D-cal soo illz askz zee questionz!:wave1:

im ordering a custom cal (chip) from a member of the boards. I found out a family friend of mine is able to socket the SMEC ill be using, but he and i dont know what chip needs to me removed and socketed.

would there happen to be a how to? what socket does he need to use and does he need to do anything to it to make it work?

thanks:thumb:
Anonymous_User
10-22-2006, 04:45 AM
http://www.omniglht.com/cal.html
WOP'R
10-22-2006, 08:03 AM
thats for an LM
WickedShelby88
10-22-2006, 08:51 AM
Una from here has a how to writeup on socketing a smec. Check it out.
Anonymous_User
10-22-2006, 11:57 AM
thats for an LM

ha ha, oops, sorry about that.... there's one for a SMEC somewhere...
Una
10-22-2006, 07:12 PM
My site is down, couldn't afford the $9 a month..
WOP'R
10-22-2006, 09:28 PM
i was looking for it and thought i was blind.

Damn, anyone else?? maybe you could explain it to me Una?
MiniMopar
10-23-2006, 12:55 PM
Take a look at Graem Smith's document. It covers making a SMEC flashable, but it will show you where the chips fall, so to speak:

http://www.knizefamily.net/russ/electronics/auto/moparecu.html
ShelGame
10-23-2006, 01:41 PM
As for what chip to remove/socket: It's the only 28-pin ceramic DIP on the board. And, it should be the only chip with a sticker on it (usually with a 3-digit number, the last 3 digits of the P/N). Under the sticker is a UV-window. If you're looking down on the baord, it's in the lower left corner (on the SBEC, it's the lower right corner). Make a note of the pin 1 orientation before you take it out. Not all boards are marked to show pin 1...
WOP'R
10-23-2006, 09:33 PM
awsome thanks shelgame:thumb:

this is iloveshelbys on td.com and ohhh man i can't wait:p
butchsuppe
10-23-2006, 11:26 PM
Buy 1 of mine, it,s already done + you,ll have a spare factory one.