View Full Version : TIII Tips on doing valve stem seals on car
Wastelands Warrior
04-22-2019, 11:27 AM
Hi. Could someone walk me through doing valve stem seals on a TIII Spirit? I'm thinking the cams have to come out...is a special spring compressor needed? Please fill in the blanks. Thanks
turbovanmanČ
04-24-2019, 11:17 PM
Hi. Could someone walk me through doing valve stem seals on a TIII Spirit? I'm thinking the cams have to come out...is a special spring compressor needed? Please fill in the blanks. Thanks
Can't be done, pull the head.
DOHCRT
04-25-2019, 12:32 PM
I built a spring compressor and I'm pretty sure Jackson has something similar that allows for an on the car swap. I have done at least 10 sets on the car, using compressed air and my custom spring compressor. Now that I have a mill and lathe, I am going to machine a nicer version. Make sure you use the 4.6? Thunderbird seals. They work awesome, just make sure you remove the factory spring shim, as the new seal has one built in.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.