2 piece upper plenums

[lengel]

Seems to be some interest in these upper plenums. I would need to sell 5 plenums to do this batch. They will be $325 + shipping, and I will need a $120 non refundable deposit for all 5 plenums to get started. When I receive 5 deposits the aluminum will be ordered. Once the aluminum is delivered, I will give my self 3 months to complete all orders (could be sooner but no later). The Buyer will have 30 days to pay the balance upon completion. After 30 days the plenum will be sold to recover my costs. These will all be the same design as the plenums I did in the past. The buyer will be responsible for adding any vacuum/sensor ports. The plenum has a .25" wall so it can be drilled and tapped anywhere on the plenum. So lets see a show of hands of who wants one. Only post if you are 100% committed to buy one. Here are some pics if you have not already seen them. After we have 5 committed buyers I will post deposit info. I will be stating this same group buy on the other site, so if you post here dont post over there. This will just keep me less confused.


1) fastasleep (deposit paid)
2) Aries_Turbo (deposit paid)
3) Chad Deborde (FB) (deposit paid)
4) cbw 1994 (deposit paid)
5) Nemesismachine (deposit paid $150)
6) moparzrule (deposit paid)
7) Jmoatz (deposit paid)
8) MaxHeadroom (deposit paid)
9) MaxHeadroom(deposit paid)
10) Vango (deposit paid)
11) Vango (deposit paid)
12) Mark Lucas (FB) (deposit paid)
13) raccoon (deposit paid)
14) Travis Brown (FB) (deposit paid)
15) Dan H (deposit paid)
16) Motorhead 153 (deposit paid)
17) mcaracter (deposit paid)
18) Jason Keller (FB) (deposit paid)
Thanks Adam



Sent from my XT1254 using Tapatalk
https://uploads.tapatalk-cdn.com/20181002/81df3eb5e04e2068b6562c30687d378e.jpghttps://uploads.tapatalk-cdn.com/20181002/c431175aea11c1338ff586f9f8a431bf.jpghttps://uploads.tapatalk-cdn.com/20181002/d6a47ab89e810f37d64c5a6dc1ff35bf.jpghttps://uploads.tapatalk-cdn.com/20181002/237cd703d27419ac829f0227ad66ffae.jpghttps://uploads.tapatalk-cdn.com/20181002/68552bf00cb02edac3c41dbcd7033cab.jpghttps://uploads.tapatalk-cdn.com/20181002/bcab57fda373f7f4e0d728af07b9fb8c.jpghttps://uploads.tapatalk-cdn.com/20181002/16238344427c6a401485d63d6b28b977.jpghttps://uploads.tapatalk-cdn.com/20181002/4b735334ed89f6bebd8a071d6ff36f79.jpg

[aonejeeparmy]

1) aonejeeparmy

[fastasleep]

2.) fastasleep

[Aries_Turbo]

3) Aries_Turbo

[lengel]

1) aonejeeparmy
2) fast asleep
3) Aries_Turbo
4) Chad Deborde
5) cbw 1994
6) Nemesismachine
Sent from my XT1254 using Tapatalk

[cbw1994]

5) cbw1994

[Nemesismachine]

6) nemesismachine

[Jmoatz]

I want one

[lengel]

I want oneSounds good. Would like me to make it official and put your name on the list?

Sent from my XT1254 using Tapatalk

[moparzrule]

I'll take one

[lengel]

Since we already have enough to go ahead with the group buy. I will be ordering aluminum the end of next week. This should move along pretty quickly. If anyone still wants to get in, you have till the end of next week.

Sent from my XT1254 using Tapatalk

[thedon809]

Love mine. Figuring out the cable bracket for my Jeep 4.0 TB was a pain though. https://drive.google.com/uc?export=download&id=1keKWLjyYCN9Jhw1EeeSRvsk2mDVNSIeR

[MaxHeadroom]

I’m in for two. Msgd you on fb.


Sent from my iPhone using Tapatalk

[Vango]

I’d like two please. Thanks!
Seth Buchbinder

[raccoon]

I'd like one. PM me your paypal for deposit.

[lengel]

I sent everyone a pm regarding deposits, if I missed you please pm. Also if your not on the list , but would like one, you can still get in on these, since the aluminum is not ordered yet. Once all deposits are collected I will be ordering the aluminum.



Sent from my XT1254 using Tapatalk

[Dan H]

One for me, please. Deposit sent

[mcaracter]

PM sent. I'd love one as well! I just need to know where to send deposit. Thanks!

[lengel]

Sounds good pm replied.

Sent from my XT1254 using Tapatalk

[lengel]

I would wanted to order the aluminum last week, but I'm still waiting on a few deposits. Guess I'll make a dead line of this Wednesday for deposits to be paid. If deposits aren't paid by Wednesday, I will assume you no longer want one, and you will be taken off the list. Aluminum will then be ordered this Thursday.

Thanks Adam

Sent from my XT1254 using Tapatalk

[lengel]

Update. Aluminum has been ordered yesterday.

Sent from my XT1254 using Tapatalk

[lengel]

Picked up some aluminum today.https://uploads.tapatalk-cdn.com/20181026/04924f026862e11ca90fa18b327d524a.jpg

Sent from my XT1254 using Tapatalk

[mcaracter]

Now THAT, is a thing of beauty!

[lengel]

Little bit of progress on this rainy morning. All cut to length and ready to machine!https://uploads.tapatalk-cdn.com/20181027/128afb6ad052d52dbc23c3ba22af0f36.jpg

Sent from my XT1254 using Tapatalk

[Dr. Johny Dodge]

hope you factored in the cost of the bandsaw blade ++

[lengel]

Some progress. I got all 20 TB flanges done. https://uploads.tapatalk-cdn.com/20181129/605007bdc29b95433011cdfaca60129e.jpg

Sent from my XT1254 using Tapatalk

[lengel]

More progress. All 20 plenum flanges are done, and almost filled a 55 gal drum with aluminum chips!https://uploads.tapatalk-cdn.com/20181204/935a5ee6aea6ab17df9ac6c72015e0b4.jpghttps://uploads.tapatalk-cdn.com/20181204/128e0b10f8755e1a708504582719c097.jpg

Sent from my XT1254 using Tapatalk

[lengel]

Finished up some end caps.https://uploads.tapatalk-cdn.com/20181207/4e5c70c379c83051c3ebe0ecb54ccb27.jpg

Sent from my XT1254 using Tapatalk

[lengel]

Machined all the plenum tubes to length , and also cut the OD on all of them.https://uploads.tapatalk-cdn.com/20181208/3c2cdb0708d1d2a2c5e8d56d2ac1d672.jpg

Sent from my XT1254 using Tapatalk

[Nemesismachine]

So far so good!

[mcaracter]

I love the progress! I check back often.

[lengel]

Finished up the plenum tubes last week, and today I dropped off all the parts at Brian Slowe's shop to get to get welded up.
https://uploads.tapatalk-cdn.com/20181217/76214c6af10e71fb0f78b61e1a5e7fc6.jpg

Sent from my XT1254 using Tapatalk

[lengel]

Brian is moving along pretty good with the welding. All the plenum flanges are welded in!https://uploads.tapatalk-cdn.com/20190109/5f60c6b50c7ab612c28bd6592b66359c.jpg

Sent from my XT1254 using Tapatalk

[Nemesismachine]

Still can't find the like button... Thanks for the update.

[lengel]

Picked up all the plenums from Brian Slowe's shop today. He did a fantastic job on the welds, as always!
https://uploads.tapatalk-cdn.com/20190125/b7cab493e8c366ce78fa02ec11b5f3d3.jpg

Sent from my XT1254 using Tapatalk

[mcaracter]

Excellent! What else needs to be done?

[lengel]

Excellent! What else needs to be done?Nothing they are done.

Sent from my XT1254 using Tapatalk

[Nemesismachine]

Just settled my account, all paid up.

[Aries_Turbo]

got mine today! thanks Adam! and Brian too!

Brian

[mcaracter]

Got mine yesterday. It looks great!

[Nemesismachine]

Fits like a glove!https://uploads.tapatalk-cdn.com/20190208/1c1d039179a54d5458f92c3ee381088c.jpg

[wheming]

^^^look at fancy you with the stud kit!

[Nemesismachine]

Got a pile from other various projects ;)

[moparzrule]

I kinda like that stud idea!

[raccoon]

Unpacked mine today. What a great part, its overkill in the quality department. There was no need to turn the od on the large pipe but it makes it look so nice. :thumb:

Where is everyone drilling holes for the vacuum and sensors?

[Nemesismachine]

I gotta polish that off, the texture sets off my tactile defensiveness something fierce