PDA

View Full Version : BMF intake 655 edition!


acannell
07-11-2017, 07:04 PM
Just machined the first ever BMF head flange designed for the 655 head. Its a HUGE hole!

Only a few spots left on the 2017 BMF group buy!

http://www.turbo-mopar.com/forums/showthread.php?81603-The-BMF-intake-is-BACK-for-2017!

https://s26.postimg.org/ajlj0s3y1/20170711_154913.jpg
https://s26.postimg.org/ptle7yzg9/20170711_155549.jpg
https://s26.postimg.org/edez9xla1/20170711_155620.jpg
https://s26.postimg.org/ca4k29lh5/20170711_155623.jpg
https://s26.postimg.org/dg8k129rt/20170711_155715.jpg
glhs875
07-12-2017, 04:50 AM
That's a good bit more port area!!!!
thedon809
07-12-2017, 09:07 AM
Is that going to have any issues sealing against the head? Looks pretty thin.
acannell
07-12-2017, 10:18 AM
Is that going to have any issues sealing against the head? Looks pretty thin.

I would say if the non-655 head flange seals, this one would. I mean its not like the thinner section is going to bend. So I suppose it has to seal. I think.