Shelby Wheel Refinishing

[cordes]

What are you guys using to refinish the metal part of the Shelby wheels. One that I have is really worn on the edges and I'd like to class it up a bit before putting it into my Lancer.

https://c1.staticflickr.com/3/2880/33675769860_69687b22c8_o.jpg (https://flic.kr/p/TiP88J)IMG_2704 (https://flic.kr/p/TiP88J) by Brian Cordes (https://www.flickr.com/photos/134900715@N08/), on Flickr

[ajakeski]

SEM Trim Black

https://www.summitracing.com/parts/smm-39143?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-sem-products-inc&gclid=COTNkqzlp9MCFdK6wAodI5sBjw

[cordes]

Thanks a ton. I sprang for it from Amazon due to my ongoing grudge against Dave at Summit. I'll do a video on this and report back when I have it in the car.

[dodgeman87]

Will it also match the black that is on the door handles on my Lancer ?

[ajakeski]

Will it also match the black that is on the door handles on my Lancer ?

It matches all satin black finishes

[cordes]

Here is the finished product. I think it turned out pretty well. It's not perfect, but it's really nice considering how bad it was when I got it.

https://c1.staticflickr.com/5/4170/34434842036_11b68450f8_o.jpg (https://flic.kr/p/UsTyR3)IMG_4152 (https://flic.kr/p/UsTyR3) by Brian Cordes (https://www.flickr.com/photos/134900715@N08/), on Flickr

https://c1.staticflickr.com/5/4171/34315972922_6c3eb2b61b_o.jpg (https://flic.kr/p/Uhokcy)IMG_4155 (https://flic.kr/p/Uhokcy) by Brian Cordes (https://www.flickr.com/photos/134900715@N08/), on Flickr

[ajakeski]

Looks nice. Did you do the "Wood" part too?

[cordes]

All I did to that was clean the gunk off of it very well. I was amazed at how well it cleaned up.