The BMF intake is BACK for 2017!

[acannell]

Yes, its true! The BMF intake is returning for 2017!


The BMF intake is the ultimate intake manifold for 2.2/2.5 turbo mopars.


For detailed specifications and pictures of the BMF Intake, click here: ----> THE BMF INTAKE (http://www.exoticelectron.com/bmf_intake.html)


Just like before I'll be personally machining and welding each BMF intake here in Southern California.


To make this group buy possible, I need to have 20 confirmed orders.


Pricing remains unchanged at $572 for a fully welded BMF intake shipped to USA, paid by credit/debit card.


To save you some money, if shipping ends up costing me less than $25, I can refund you the difference.


And, if you pay by mailing a check or money order, you can take the credit card processing fees off the total (about $17).


SPECIAL BONUS!!


For payments received before April 14th, 2017, I will include a free 4th cylinder coolant mod adapter plate! See here for more info: 4CCM (http://www.exoticelectron.com/4ccm.html)


The production schedule for new BMF orders is as follows:


-Shipping will begin two months after payment has been received for at least 20 orders.
-Orders will ship in the order payment was received.
-One BMF will ship every three weeks.
-The status of BMF production will be regularly updated on the forums, as before.


To order your BMF intake, you can pay at my online store with a credit/debit card here:


https://squareup.com/store/ExoticElectron


To pay by check or money order, please PM me for mailing instructions.


If you require shipping outside the USA, PM me to discuss please.


Thank you all very much for your support! I've had a long break to recover from the massive amount of work it takes to make BMF intakes, and now I'm eager to build them again!




https://s26.postimg.org/lvp4d8buh/bmf_intake_full.jpg
https://s26.postimg.org/tlvwide61/BMF_intake_unwelded_kit.jpg
https://s26.postimg.org/5yqcgijg9/bmfi_exploded_view.jpg

- - - Updated - - -

We've got a few folks on board! Join the 2017 group buy for the BMF intake!

1. catchacuda (PAID IN FULL)
2. craknjak (PAID IN FULL)
3. Mr Overkill (50% DEPOSIT IN THE MAIL)
4. 2cornflakes_GLHT
5. INSATANSSEAT
6. dartswinger
7. 2.2Mopar
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

[Wastelands Warrior]

You should make a TIII BMF. Or some 'lil sumthin' sumthin'
for us TIII folks. :)

[acannell]

You should make a TIII BMF. Or some 'lil sumthin' sumthin'
for us TIII folks. :)

Let the games begin!! http://www.turbo-mopar.com/forums/showthread.php?81604-A-BMF-intake-for-TIII-s&p=1123181#post1123181 :eyebrows:

[thedon809]

I've been a little out of the loop. Will it work with TU's cast manifold?

[acannell]

I've been a little out of the loop. Will it work with TU's cast manifold?

I believe it would, with possibly minor grinding of the BMF head flanges or the TU cast manifold or both. But heres a list of people who indicated they were installing their BMF with the TU cast intake, and what forum they are on (just in case its not obvious)

cellpadding="0" cellspacing="0" width="250" style="width: 250px"
|-
| style="height: 17px; width: 187px" | 88C/S
| style="width: 64px" | TM
|-
| style="height: 17px" | k03hemi
| TM
|-
| style="height: 17px" | iTurbo
| TM
|-
| style="height: 17px" | moparzrule
| TM
|-
| style="height: 17px" | Moparmark1
| TD
|-
| style="height: 17px" | k03hemi
| TM
|-
| style="height: 17px" | LaserDad
| TM
|-
| style="height: 17px" | The Pope
| TM
|-



I believe moparzrule has some great pictures of the BMF and the TU cast intake in his project log on here. I'll see if I can find them.

[acannell]

I've been a little out of the loop. Will it work with TU's cast manifold?

here we go, looks like it fit with some minor grinding, and a Z bracket for the wastegate..but definitely read through in case I missed something

http://www.turbo-mopar.com/forums/showthread.php?76409-88-shelby-Z-quest-for-11-s-(lots-of-pics)&p=1058795&viewfull=1#post1058795

[thedon809]

If everything goes smoothly in the next couple weeks I'd be down for one.

[ShadowFromHell]

Any price break on buying just the parts? Not that there is anything wrong with your welding. Im just a fabricator by trade and like to do as much as I can myself.

[acannell]

If everything goes smoothly in the next couple weeks I'd be down for one.

Awesome! Payments received by April 14th get a free 4ccm adapter! I can also take 50% deposits to hold your place in production and get the free 4CCM.

- - - Updated - - -


Any price break on buying just the parts? Not that there is anything wrong with your welding. Im just a fabricator by trade and like to do as much as I can myself.

I used to have an unwelded version with a discount but I just cant do it anymore. The machining time and labor is really expensive and even though the welding is alot of labor it doesnt even come close to the machining. So I can definitely leave sections (or all) of it unwelded but I cant do a discount on it anymore. However payments received by April 14th get a free 4CCM adapter!!

[acannell]

Thank you Mr Overkill!!

1. catchacuda (PAID IN FULL)
2. craknjak (PAID IN FULL)
3. Mr Overkill (50% DEPOSIT RECEIVED)
4. 2cornflakes_GLHT
5. INSATANSSEAT
6. dartswinger
7. 2.2Mopar
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

[acannell]

SPECIAL DEALS on...


THE BMF INTAKE


Until APRIL 14th!!


As well as the existing deal (Buy ONE BMF intake, get a FREE 4CCM adapter plate!) now added there is:



Buy TWO BMF intakes:


-get $100 off your order, and


-TWO FREE 4CCM adapter plates!



http://www.exoticelectron.com/bmf_intake_full.jpg
http://www.exoticelectron.com/4thcyl_adapter.jpg
http://www.exoticelectron.com/4thcyl_installed.jpg

[acannell]

Thank you CORNFLAKES_GLHT!!! :party2::jason:


1. catchacuda (PAID IN FULL)
2. craknjak (PAID IN FULL)
3. Mr Overkill (50% DEPOSIT RECEIVED)
4. cornflakes_GLHT (PAYMENT IN THE MAIL)
5. INSATANSSEAT
6. dartswinger
7. 2.2Mopar
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

[acannell]

A YUGGGEEE thank you to INSATANSSEAT!!! :DDDD


1. catchacuda (PAID IN FULL)
2. craknjak (PAID IN FULL)
3. Mr Overkill (50% DEPOSIT RECEIVED)
4. cornflakes_GLHT (PAYMENT IN THE MAIL)
5. INSATANSSEAT (50% DEPOSIT RECEIVED)
6. dartswinger
7. 2.2Mopar
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

[acannell]

THEDON809...you are truly a DON among dons!! THANK YOU!!!

1. catchacuda (PAID IN FULL)
2. craknjak (PAID IN FULL)
3. Mr Overkill (50% DEPOSIT RECEIVED)
4. cornflakes_GLHT (PAID IN FULL)
5. INSATANSSEAT (50% DEPOSIT RECEIVED)
6. thedon809 (PAID IN FULL)
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

[acannell]

1. catchacuda (PAID IN FULL)
2. craknjak (PAID IN FULL)
3. Mr Overkill (PAID IN FULL)
4. cornflakes_GLHT (PAID IN FULL)
5. INSATANSSEAT (50% DEPOSIT RECEIVED)
6. thedon809 (PAID IN FULL)
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.

[acannell]

Okay guys to make things happen I'm cutting the group buy down to 10! Only 4 spots left!!

AND SPECIAL PROMOTION FOR MAY

Orders received in May get a FREE KSM knock sensor mount, or a FREE 4CCM adapter plate, your choice!

1. catchacuda (PAID IN FULL)
2. craknjak (PAID IN FULL)
3. Mr Overkill (PAID IN FULL)
4. cornflakes_GLHT (PAID IN FULL)
5. INSATANSSEAT (50% DEPOSIT RECEIVED)
6. thedon809 (PAID IN FULL)
7.
8.
9.
10.

[thedon809]

Come on people. I don't know how much longer acannell is going to keep doing this so you might want to jump on it now while you still can.

[acannell]

Come on people. I don't know how much longer acannell is going to keep doing this so you might want to jump on it now while you still can.

I know it seems slow but really we are going faster than the last group buy by a little bit. 4 spots has got to be pretty easy to fill!

[acannell]

bump!!

[wheming]

Just to be clear, did you say there is a discount if wanting the BMF unassembled (no welding at all)?

[acannell]

Just to be clear, did you say there is a discount if wanting the BMF unassembled (no welding at all)?

I used to offer a discount for an unwelded kit but I just can't anymore, especially with the group buy at just 10. The head flanges and plenum plate are so expensive to machine that I have to make up for it somewhere.

[acannell]

Made some BMF parts today!


https://s26.postimg.org/ydfe6vdvd/20170717_185818.jpg

[thedon809]

Any updates on these?

[acannell]

Any updates on these?

I'll make sure everyone is taken care of one way or another. I PM'd you right now. Sorry for the delay, my thread notifications almost never work right.