WTB swirl head +1 exhaust valves.

[masterjr33]

currently not in stock.
I need to get a head rebuilt.
ASAP. my valve stem has dropped
anyone have those.


I will buy them out right.
or buy them and REPLACE them with a set once cindy has them back in stock


so if you are sitting on a build. please help me get back on the road.
she says they are about 1-2 months out.


thanks.

[Chris W]

currently not in stock.
I need to get a head rebuilt.
ASAP. my valve stem has dropped
anyone have those.


I will buy them out right.
or buy them and REPLACE them with a set once cindy has them back in stock


so if you are sitting on a build. please help me get back on the road.
she says they are about 1-2 months out.


thanks.

According to our supplier we should have a few sets after Jan 22nd.

Chris-TU

[masterjr33]

i dont mean to whore around different places . but i need the car together.
cindy is out. you are out
and forward motion is out.

current head has dropped stem. leaking/bypassing oil.

I need 1 groove swirl exhaust valves ASAP. any help appreciated.

- - - Updated - - -

willing to replace a set someone has sitting around when they come in.

[iangoround]

I have a set of TU +1mm exhaust valves if you don't mind used ones. Do you need just one, or a whole set?

[Force Fed Mopar]

Technically speaking, the stems don't drop, the guides do. Unless you are saying you dropped a valve, IE the retainer came loose and dropped the valve into the chamber and bent it.

If it's still running fine, just has a dropped guide and smokes, chances are your valves are fine.

[masterjr33]

I have a set of TU +1mm exhaust valves if you don't mind used ones. Do you need just one, or a whole set?

yes i need a set of 4. are these the ones with single groove keepers>?
if so i could really use them to get me back running.

[masterjr33]

Technically speaking, the stems don't drop, the guides do. Unless you are saying you dropped a valve, IE the retainer came loose and dropped the valve into the chamber and bent it.

If it's still running fine, just has a dropped guide and smokes, chances are your valves are fine.


Correct. its the guide.


i said stem because of the problem.




2 of my guides have slide down.
insteed of sticking out about a half inch.


they are only sticking up about 1/4 of an inch.


not allowing my stem seals to full seat and stay on the guide. causing major smoking.




So i have a extra head.
ive orderd
PT lifter.
PT shims.
Titanium LS retainers 8*.
sealed power 8* locks.


to use the 8* locks i need a set of single groove exhaust valves.
best way to obtain those is with the +1 custom ones our vendors have.


but non of our vendors have them at this time.


So im driving around a smoking turd.
Looking to buy or borrow +1 exhaust valves with single groove keepers.

[iangoround]

I thought the exhaust valves all had two or three groove keepers? The intake valves are single groove, aren't they?

[masterjr33]

our vendors supply a valve that aare +1 in size and use the 1 groove lock.
having 1 groove on the intake and exhaust lets me use the correct 7* locks.
so i dont have a missmatch of factory 8* 4 groove exhaust valve locks.
with the titanium LS1 retainers that have a 7* angle.

using the +1 single groove and the 7* single groove locks. matches perfect with 7* retainers i am using.


everyone seems to be out.
I wish someone was sitting on a set for a build they could let me use for a month or two till the supply is back in.

[Chris W]

They are back in stock!!!

We have 3 sets at the moment. Limited quantities

[4 l-bodies]

masterjr33,
Sorry I can't get the "reply with quote" to work. If your using LS retainers and 7° keepers with stock stem diameter valves, make sure the keepers aren't butting together. Make sure your buying 5/16" or 8mm keepers and not 3/8". Also check how far keepers protrude out the bottom of retainer. This could become an issue if using a higher than stock lift cam. Chris has some -.060 green keepers he got from me that are pictured on far left. See how much better they fit inside retainer? Make sure you check installed height and open and closed spring pressures when using conical springs. I see lots of mistakes made when setting up valvetrain. Check everything!!!
Todd

[Chris W]

A set got sold today so only 8 valves left.

Chris-TU

[masterjr33]

ya quote thing isnt working.. I am using stock intake and the +1 exhaust ( that was me who ordered the set today)

i will post pics of the height i come up with.

gotta find someone to port my chamber a bit at the moment.. i dont trust my hand..

Ill take a ton of pics once the set up is together.