Mother Mopar

[pantera74l]

,I've just run into a big problem,I'm putting a 2.5 in my glhs and found out the crank hubs are different and the crank snout has different diameter.
Iwas hoHping to swap hubs so I could use the four bolt pulley to drive the alt.p steering and AC.If anyone knows an answer help would be greatly appreciated.Thanks

[cordes]

Are you trying to use an under drive pulley you had from the non-common block 2.2? Why not just use the pulley off of the 2.5?

[pantera74l]

Because the 2.5 has 1 ribbed pulley and 1 v groove pulley the2.2 has 1 ribbed pulley and 2 vgroove pulleys

[cordes]

The 2.5 pulley you have is from a non-AC car. It should be very easy to track one down. Cheap too. Of course, if you aren't going to run AC, you don't need the outer V belt slot.