shrk2thgrl
11-17-2016, 03:07 PM
I am trying to find a reputable place that could make me a Manual Transmission Flywheel for a 2.4L Turbo motor that would be the same thickness as the Jeep Liberty Dual Mass flywheel but would accept the 2.2L Turbo II Clutch. That is the only piece to the puzzle that I need to bring together a PT Cruiser Turbo 2.4L motor in front of the Jeep Liberty Bellhousing on an AX15 5spd using a 2.2L TII clutch. That Dual Mass Flywheel is too weak I fear to handle the 200HP let alone if I increased the boost. So I am looking to have a custom flywheel made but don't seem to find any good reputable outfits while doing some Google research? Any suggestions??
The reason I am using an AX15 is I have one already and I want to see what it will handle. I hear lots of things about the tranny but want to find out on my own if it will hold up or not. My own R&D if you will...
Thanks, Shrk2thgrl
The reason I am using an AX15 is I have one already and I want to see what it will handle. I hear lots of things about the tranny but want to find out on my own if it will hold up or not. My own R&D if you will...
Thanks, Shrk2thgrl