PDA

View Full Version : Turbos/Intercoolers: WTB: TIII BOV, tube, hose



iTurbo
09-27-2016, 12:57 AM
I'm in need of a stock TIII BOV, formed discharge hose, and the stock 2.25" metal pipe that has the BOV hose nipple on it.

martin kolner
09-27-2016, 11:34 AM
1992 16 valve air cleaner from the Mopar part book:

1 04669580 1 AIR CLEANER ASSEMBLY
2 05277363 1 COVER, Air Cleaner
3 04213583 1 FILTER, Air Cleaner
4 05277512 1 HOUSING, Air Cleaner Filter
5 05277576 4 LATCH, Air Cleaner
6 05277655 1 FILTER, Crankcase Inlet Filter
7 00153640 4 CLAMP
8 1 HOSE, Drain (not serviced)
9 06500201 2 NUT, Heat Shield Attach
10 05277781 1 SHIELD, Heat
11 05277356 1 BRACKET, Air Cleaner Mounting - Eng. Side
12 06500583 2 NUT
13 05277633 1 BRACKET, Air Cleaner Mounting
14 06033135 6 CLAMP
15 05277789 1 HOSE, Air Cleaner to Turbo
16 04504564 1 VALVE, Air Shut Off
17 04287145 1 HOSE, Vacuum
18 04324488 1 VALVE, Check
19 05277790 1 HOSE, By-Pass Valve
20 05277873 1 HOSE, Tube to Air Cooler
21 05277771 1 TUBE ASSEMBLY, Turbo to Intercooler
22 05277786 1 HOSE, Turbo to Tube
23 06101445 2 NUT and WASHER

4504564 BOV
5277790 formed hose attached to it


have both NOS or used

4 l-bodies
10-07-2016, 03:27 PM
Hey Jeremy,
Contact Jessie Buhr (JRB exhaust?). I sold him some misc. TIII stuff for cheap I had laying around a year or two ago. No clue how I ended up with it. I believe it had everything and then some of what your looking for. PM me if you can't contact him. I have a phone # for him. Not really sure why he bought the stuff as he doesn't have any TIII stuff either. IIRC, he was going to use the stuff for a V8 old school A body turbo application. Pretty sure that one fell by the wayside as he sold the Duster.
Todd

iTurbo
10-09-2016, 10:50 AM
Hey Todd, I just got a TIII bov setup in the mail from Vic (DOHCRT), but wouldn't mind finding another setup for the last (#4) TIII I'm going to build. Thanks for the heads up.

DOHCRT
10-09-2016, 03:08 PM
I didn't realize you might need another setup Jeremy, I have at least 2 other setups...

iTurbo
10-09-2016, 04:41 PM
I didn't realize you might need another setup Jeremy, I have at least 2 other setups...

Hey Vic, I have enough parts (pretty much) to build one more TIII. I have *mostly* everything, but I'm sure I will find out I am short on a couple things like the bov setup. I'm probably going to build it next spring after completing the current projects. I'll keep you in mind when I go through my stash and find out what all I need to make it complete, thanks!