tryingbe
09-21-2016, 03:37 PM
Not sure why I waited so long to do the door seals. Removal of the old seals were easy, took all 20 seconds to pull it out then clean the area. Installation was almost as easy. Just be careful with the plastic trim and tap slightly with a light hammer.
$20 shipped for a pair. You'll need two set to do a four door Omni. Not sure if they will work for 2 door L bodies. The seal is already filled with black RTV inside, so the only tools you need are a hammer, phillips and flat head screw driver.
http://www.americanmuscle.com/door-weatherstripping-kit-7993.html
Old leaky door seals
http://www.thelostartof.net/tryingbe/dodge/omniproject/2016/doorseals/pic63.jpg
Off they go
http://www.thelostartof.net/tryingbe/dodge/omniproject/2016/doorseals/IMG_8735.jpg
Installing new ones
http://www.thelostartof.net/tryingbe/dodge/omniproject/2016/doorseals/IMG_8736.jpg
Finished.
http://www.thelostartof.net/tryingbe/dodge/omniproject/2016/doorseals/IMG_8744.jpg
$20 shipped for a pair. You'll need two set to do a four door Omni. Not sure if they will work for 2 door L bodies. The seal is already filled with black RTV inside, so the only tools you need are a hammer, phillips and flat head screw driver.
http://www.americanmuscle.com/door-weatherstripping-kit-7993.html
Old leaky door seals
http://www.thelostartof.net/tryingbe/dodge/omniproject/2016/doorseals/pic63.jpg
Off they go
http://www.thelostartof.net/tryingbe/dodge/omniproject/2016/doorseals/IMG_8735.jpg
Installing new ones
http://www.thelostartof.net/tryingbe/dodge/omniproject/2016/doorseals/IMG_8736.jpg
Finished.
http://www.thelostartof.net/tryingbe/dodge/omniproject/2016/doorseals/IMG_8744.jpg