View Full Version : Transmission: flywheel/ pressure plate bolts
not looking to spend the money on arp right now, anyone have some stock hardware laying around ?
wheming
08-15-2016, 09:48 AM
They have the torque converter bolts in the HELP! section in the parts stores, i think its a Dorman item. They weren't expensive, and they were new.
Or you just mean you need the bolts for the crank?
acannell
08-15-2016, 08:54 PM
I have the bolts that hold the flywheel to the crank from a 90 2.5 turbo common block would that work? PM me if you want them
DevoBuzz
08-15-2016, 09:19 PM
FYI...6 bolt flywheel uses different bolts then 8 bolt flywheel. The thread pitch is different.
black86glhs
08-15-2016, 10:32 PM
FYI...6 bolt flywheel uses different bolts then 8 bolt flywheel. The thread pitch is different.And they are a ----- to find....trust me.
mopar-tech
08-16-2016, 01:07 AM
And they are a ----- to find....trust me.
How many you want? Might have a bin full of them.
sorry should have been more specific for an 8 bolt crank, the bolts to hold the flywheel to the crank for manual transmission (auto are shorter) and also the pressure plate bolts but those arent anything special really just grade 10.5 bolts so can probably just use some others
Charger R/T
09-01-2016, 09:25 PM
The parts pdf show 2.2, 2.5, and the 3.0 all use the same part number for the manual trans flywheel to crank bolt. 6501197. If the original poster gets his I would be interested in 8 of them if someone has a bin full.
Tim
tryingbe
09-01-2016, 09:34 PM
The parts pdf show 2.2, 2.5, and the 3.0 all use the same part number for the manual trans flywheel to crank bolt. 6501197. If the original poster gets his I would be interested in 8 of them if someone has a bin full.
Tim
$2 a piece.
http://arizonaparts.com/
Charger R/T
09-01-2016, 09:47 PM
thanks
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.