Pat
10-08-2006, 10:32 PM
All prices below include shipping in the lower 48 states unless otherwise indicated.
Mopar +40's (52 lb/hr) new in box, $130
2 pc intake with fuel rail. Will include stock injectors and regulator if you want them. $185
G head, I think it's from an '85. Seems to be in decent shape, but I'm sure it could use a freshening. $100
MP Strut Rod bushings - $25
8v (w/body mounted coil) Magnecore wires, barely used - $40
1 pc intake and rail - $60
valve covers - I have a bunch if anyone needs one - $25
MP bobble strut - modified Neon unit, works perfect on older TD's. Stiffer than stock, but much more user friendly than solid - $50
'88 T-1 SMEC - $70
'88 T-II SMEC - $85
Custom SMEC 3 bar/+40 cal done by TU (Paul Vellicky) - cal set up for 2.2/G head, switchable boost 14psi/18 psi but I tended to run a G valve anyway. Ran well in my old car. I ran 13.5's with it in a full weight Spirit ES at 18 psi on pump gas. - $200
T- II air box - $50
The parts listed below are pick up only...I will not ship
Radiator/intercooler out of an '87 Shelby Z, came from running car, seems to be in pretty good shape - $150
chin spoiler from '87 Shelby Z. Blue, not perfect but useable. $25 (pick up only!)
M&H 23x7x15 slicks mounted/balanced on pizza wheels. Used, but a ton of life left in them. These slicks hook hard..have cut 1.7's in full weight Spirit R/T. $200
Complete '87 Shelby Z 4 wheel disk brake system. Have everything, including master cylinder and proportioning valve - $125
Feel free to email me at pculkin@juno.com or PM me here with any questions. I do accept paypal, but will add a couple of bucks to cover the paypal charges that they hit me with.
I have a ton of other stuff lying around, so if you need anything specific, feel free to ask. I'd like to make some extra room in the garage. Thanks for looking.
Pat
Mopar +40's (52 lb/hr) new in box, $130
2 pc intake with fuel rail. Will include stock injectors and regulator if you want them. $185
G head, I think it's from an '85. Seems to be in decent shape, but I'm sure it could use a freshening. $100
MP Strut Rod bushings - $25
8v (w/body mounted coil) Magnecore wires, barely used - $40
1 pc intake and rail - $60
valve covers - I have a bunch if anyone needs one - $25
MP bobble strut - modified Neon unit, works perfect on older TD's. Stiffer than stock, but much more user friendly than solid - $50
'88 T-1 SMEC - $70
'88 T-II SMEC - $85
Custom SMEC 3 bar/+40 cal done by TU (Paul Vellicky) - cal set up for 2.2/G head, switchable boost 14psi/18 psi but I tended to run a G valve anyway. Ran well in my old car. I ran 13.5's with it in a full weight Spirit ES at 18 psi on pump gas. - $200
T- II air box - $50
The parts listed below are pick up only...I will not ship
Radiator/intercooler out of an '87 Shelby Z, came from running car, seems to be in pretty good shape - $150
chin spoiler from '87 Shelby Z. Blue, not perfect but useable. $25 (pick up only!)
M&H 23x7x15 slicks mounted/balanced on pizza wheels. Used, but a ton of life left in them. These slicks hook hard..have cut 1.7's in full weight Spirit R/T. $200
Complete '87 Shelby Z 4 wheel disk brake system. Have everything, including master cylinder and proportioning valve - $125
Feel free to email me at pculkin@juno.com or PM me here with any questions. I do accept paypal, but will add a couple of bucks to cover the paypal charges that they hit me with.
I have a ton of other stuff lying around, so if you need anything specific, feel free to ask. I'd like to make some extra room in the garage. Thanks for looking.
Pat