Looking for window nuts for omni

[going4speed]

looking for window nuts that hold the door glass to the regulator. These are 7/16" hex with the massive floating washer.

[going4speed]

found

[johnl]

Where? Part Number?

[2.216VTurbo]

I only know of 2 places where 11mm nuts are found on the whole car, these three that hold the windows on and the two plastic nuts that hold the logic module in the passenger kick panel.

[going4speed]

I found the one I lost. I did not find replacements


Where? Part Number?

[2.216VTurbo]

I have spares JohnL, are you in need? Worth a Jack and diet to you:eyebrows:?

[johnl]

I have spares JohnL, are you in need? Worth a Jack and diet to you:eyebrows:?

yes, and I need several of the nylon blocks that the glass glides against on the front end. There's a thread on 3D printing them, or otherwise making them.

[going4speed]

I just installed a set of those 3d printed blocks! They are the real deal I tell you. That one window works awesome. Well worth it. In fact I bought 4 sets thinking the back would need it but only the front use those blocks.

[ajakeski]

I just installed a set of those 3d printed blocks! They are the real deal I tell you. That one window works awesome. Well worth it. In fact I bought 4 sets thinking the back would need it but only the front use those blocks.

I'm happy to hear that you like them.

https://www.shapeways.com/product/RQPKRLLAY/dodge-omni-window-regulator-pack?optionId=59566001&li=shop-inventory

[johnl]

Thanks, bought four!