building 93 shadow for IFO

[Prestige.racing]

93 shadow shell with 89 2.5 turbo motor
F2 cam from fwd perf.
fresh rebuild on motor
msd sport comp 6al box with msd 3 step and msd coil
8.5 magnecor wires
copper plugs gapped to .25
stage 5 ecu
sticky mickeys 26 10.5 15 mounted on pizza dish wheels
3inch electronic cutout inplace of stock cat.
turbosmart electronic boost controller
aem uego wideband
large fmic with 2.5 inch ic piping



car ran a 16.5 at 85mph with a 2.9 60ft on 10psi without the slicks spinning in 1st as well as a 200lb passenger I just got the slicks on monday and im turning it up to 15psi for IFO. air to fuel at 15psi is 11 so should be good to go track wouldnt hold 15 with the skinny street tires i had

parts i have but im waiting to get a good base number before i install them
1000cc injectors
walbro 255
gm 3bar map
super t70 turbo
60mm wastegate
gutting the car
ported head and log mani
60mm jeep TB with port matched intake
with 25psi
and E85

the car is race only and dosent get street driven ever http://i300.photobucket.com/albums/nn13/prestige_automotive/IMG_0161_zps50894zqs.jpg (http://s300.photobucket.com/user/prestige_automotive/media/IMG_0161_zps50894zqs.jpg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/IMG_0164_zpskinx3tsj.jpg (http://s300.photobucket.com/user/prestige_automotive/media/IMG_0164_zpskinx3tsj.jpg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/IMG_0166_zpsnpsgjsg8.jpg (http://s300.photobucket.com/user/prestige_automotive/media/IMG_0166_zpsnpsgjsg8.jpg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/IMG_0167_zps8xpkfjj0.jpg (http://s300.photobucket.com/user/prestige_automotive/media/IMG_0167_zps8xpkfjj0.jpg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/IMG_0168_zpsbjppsdme.jpg (http://s300.photobucket.com/user/prestige_automotive/media/IMG_0168_zpsbjppsdme.jpg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/IMG_0169_zps0kwogy3e.jpg (http://s300.photobucket.com/user/prestige_automotive/media/IMG_0169_zps0kwogy3e.jpg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/IMG_0170_zpsfptpip7n.jpg (http://s300.photobucket.com/user/prestige_automotive/media/IMG_0170_zpsfptpip7n.jpg.html)

- - - Updated - - -

[Prestige.racing]

Here is a short video of the thumpy idle and 2step-antilag

http://i300.photobucket.com/albums/nn13/prestige_automotive/th_IMG_0171_zpsnt5ac1si.mp4 (http://i300.photobucket.com/albums/nn13/prestige_automotive/IMG_0171_zpsnt5ac1si.mp4)


http://i300.photobucket.com/albums/nn13/prestige_automotive/th_IMG_0171_zpsnt5ac1si.mp4

[2.216VTurbo]

Does everyone but me know what IFO is? I did sit in the back of class tho:o got any pics with the 15X10.5X26 slicks on it? You didn't mention coil over suspension but surely with that much tire? Also lets see the pizza wheels those fit on:eyebrows:

[83scamp]

Import
Face
Off

[Prestige.racing]

The car is on stock suspension and the pics are all with the slicks on the pizza wheels I'll get a closer pic today of the wheels I had to drill out the valve stem for the tube valve stem to fit but they will only be used to race with so o well

- - - Updated - - -

The car will have no suspension in the rear. It's going to have a solid bar In place of the shocks to try to keep the car from squatting and wheel hopping or spinning

[DaveSkrab]

The car is on stock suspension and the pics are all with the slicks on the pizza wheels I'll get a closer pic today of the wheels I had to drill out the valve stem for the tube valve stem to fit but they will only be used to race with so o well

- - - Updated - - -

The car will have no suspension in the rear. It's going to have a solid bar In place of the shocks to try to keep the car from squatting and wheel hopping or spinning
Make sure your safety equipment is up to snuff, solid rear suspension can become very sketchy very quickly.
Have fun with it! It's always a good time to surprise people in these cars.

[MILKCARTON]

The tires in the pic cannot be 26x 10.5 15's

[Prestige.racing]

I put the tires on so I think I'd know lol it's tight but they will work

[MILKCARTON]

I put the tires on so I think I'd know lol it's tight but they will work

Cool, neat car, fast too....

[Ondonti]

Does everyone but me know what IFO is? I did sit in the back of class tho:o got any pics with the 15X10.5X26 slicks on it? You didn't mention coil over suspension but surely with that much tire? Also lets see the pizza wheels those fit on:eyebrows:

IFO is an event I have never had a car fast enough to bother with participating in. Not interested in being "that guy"
Boots and the Red Sled so that kinda stuff.

[shackwrrr]

IFO is an event I have never had a car fast enough to bother with participating in. Not interested in being "that guy"
Boots and the Red Sled so that kinda stuff.
May be true on the west coast but in the Midwest every 18 second Honda and VW is there...

[Ondonti]

May be true on the west coast but in the Midwest every 18 second Honda and VW is there...

Speedfactory all over the IFO here, no thanks to racing 7 second hondas because a few poor man mods make your car only legal for insane classes.

[Prestige.racing]

http://i300.photobucket.com/albums/nn13/prestige_automotive/IMG_0179_zps5qyjbxxo.jpg (http://s300.photobucket.com/user/prestige_automotive/media/IMG_0179_zps5qyjbxxo.jpg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/IMG_0177_zps5beey6mu.jpg (http://s300.photobucket.com/user/prestige_automotive/media/IMG_0177_zps5beey6mu.jpg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/IMG_0182_zpswmnubdih.jpg (http://s300.photobucket.com/user/prestige_automotive/media/IMG_0182_zpswmnubdih.jpg.html)

[Prestige.racing]

http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zpsszb8xc5i.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zpsszb8xc5i.jpeg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zpswnrluzcs.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zpswnrluzcs.jpeg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zpswslysfdf.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zpswslysfdf.jpeg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zpsc8le16qu.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zpsc8le16qu.jpeg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zps9yiwezs0.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zps9yiwezs0.jpeg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zpswdx6rnwz.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zpswdx6rnwz.jpeg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zps2h4zenk6.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zps2h4zenk6.jpeg.html)

- - - Updated - - -

i built the screamer pipe out of some leftover stainless weld elbows i had from a header i built.

- - - Updated - - -

and the 3.5 inch dp is just tacked i have to fully weld it up after i get the waste gate mounted tomorrow

[ShadowFromHell]

How are you going to check the timing? I like the turbo placement but it looks like its right over the timing window.

[minigts]

I have a similar setup. It's close, but there is enough room to get a flash of light down there. :p

[Prestige.racing]

How are you going to check the timing? I like the turbo placement but it looks like its right over the timing window.

http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zpskx4r9md8.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zpskx4r9md8.jpeg.html)

- - - Updated - - -

I had to heat up the mount for the tranny and bend the corner so that I could make sure that I would be able to check timing. It's a tight fit but hopefully Itl work

[MILKCARTON]

Oh my

[Prestige.racing]

http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zpsfkdiuakg.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zpsfkdiuakg.jpeg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zpsr72iku00.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zpsr72iku00.jpeg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zpsfji70jri.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zpsfji70jri.jpeg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zpsg8sezs0h.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zpsg8sezs0h.jpeg.html)http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zps3cqb5uta.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zps3cqb5uta.jpeg.html)
http://i300.photobucket.com/albums/nn13/prestige_automotive/Mobile%20Uploads/image_zpswlxc52tu.jpeg (http://s300.photobucket.com/user/prestige_automotive/media/Mobile%20Uploads/image_zpswlxc52tu.jpeg.html)


Got the wastegate ran and most of it wrapped I ran out of wrap also got the new intercooler mounted today

[2.216VTurbo]

It pains me to see you restrict all your other go fast parts and plans with a stock (probably ported but still) one piece intake manifold. It's your choke point.

[Prestige.racing]

I know it's not practical and most people wouldn't build one but I'm going to build a steel sheet metal intake. I'm not worried about heat soak since the car only gets ran down the track. And it's going to flow better then the 1pc I have so that's all that matters.