Plug and play 3 bar map for TIII Spirit R/T?

[Wastelands Warrior]

Does such a part exist as a plug and play 3 bar MAP sensor for a T III Spirit R/T?

[Vigo]

No because the connector has keyways in the plastic that are cut in such a way that they won't slide into the common gm 3bar map.

So you either cut and splice 3 whole wires to run the proper connector, or you modify your old one with a razor blade.

[DaveSkrab]

Additionally, the connector on '92 and newer is a different style.

[Wastelands Warrior]

Thanks for the advice fellas.

[iTurbo]

A local friend of mine that bought my old red Spirit R/T works at NAPA and he used a 3-bar MAP sensor from the Pontiac Trans Am Turbo. Pretty sure it was '89. I'll ask him if it was PNP.

[Wastelands Warrior]

A local friend of mine that bought my old red Spirit R/T works at NAPA and he used a 3-bar MAP sensor from the Pontiac Trans Am Turbo. Pretty sure it was '89. I'll ask him if it was PNP.

Thanks Jeremy.

[86Shelby]

I have ran the GM TTA map sensor and also the 3-bar offered by MSD Ignition in my 91 R/T. They are the same part, just different suppliers. Still need to spend 5 minutes with a razor blade or exacto knife to get it to fit.