Masi Header

[MPI_duster]

Does anyone make or offer a Masi 16v Header? I haven't found anything, but figured I'd check here before having a custom one commissioned.

[johnl]

Mock GLH put one together for me.
You might send a PM to mock_glh on here.

[Reaper1]

The stock Masi manifold is a pretty good piece. You do have to weld on a flange and a spacer to use a big turbo, but it works.

Of course if you don't have one that makes it kinda hard.

Are you planning on an alternate mounting position? Just curious.

John, do you have a picture of the header you are talking about?

[johnl]

http://www.turbo-mopar.com/forums/showthread.php?79671-Ramerati-Reborn&highlight=


Yes, in that thread, post #2, thanks for reminding me. And, post #15 also shows it. Don't have pics of exactly what Boyd did as it was assembled when I got it back from him.

And, yes, a very experienced and knowledgeable welder can weld that high nickel content cast iron to a bigger flange made of a similar cast iron. Powder spray welding or high preheat layers of TIG'd nickel rod, with peening, and many hours in a cool down oven are among the techniques used.

[GLHNSLHT2]

https://scontent-sea1-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/1609895_3784583628522_769886497_n.jpg?oh=5a8abf430 8b5f9a0eef1360735bbb80d&oe=57502F52


GT30R fits with with just an angle cut to the stock flange and a 1/2" T3 flange welded on top :)

https://scontent-sea1-1.xx.fbcdn.net/hphotos-frc3/v/t1.0-9/379770_3722233869817_1272507475_n.jpg?oh=7fa947c0e 4b80bc08fc1689f26d187f0&oe=575B7E71

https://scontent-sea1-1.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/1654125_3784583588521_354570452_n.jpg?oh=c17e90dee 89d879ac76cbfea1df423d6&oe=57942C68

https://scontent-sea1-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/1521644_3722228869692_341936589_n.jpg?oh=0738eccb2 d894359d7b5ad67ec49d9ba&oe=574B8073

[MPI_duster]

The stock Masi manifold is a pretty good piece. You do have to weld on a flange and a spacer to use a big turbo, but it works.

Of course if you don't have one that makes it kinda hard.

Are you planning on an alternate mounting position? Just curious.

John, do you have a picture of the header you are talking about?

Mostly to step up to a T3/T4 turbo from the stocker.


Mock GLH put one together for me.
You might send a PM to mock_glh on here.

Thanks for the lead.


https://scontent-sea1-1.xx.fbcdn.net/hphotos-xfa1/v/t1.0-9/1609895_3784583628522_769886497_n.jpg?oh=5a8abf430 8b5f9a0eef1360735bbb80d&oe=57502F52


GT30R fits with with just an angle cut to the stock flange and a 1/2" T3 flange welded on top :)

https://scontent-sea1-1.xx.fbcdn.net/hphotos-frc3/v/t1.0-9/379770_3722233869817_1272507475_n.jpg?oh=7fa947c0e 4b80bc08fc1689f26d187f0&oe=575B7E71

https://scontent-sea1-1.xx.fbcdn.net/hphotos-xaf1/v/t1.0-9/1654125_3784583588521_354570452_n.jpg?oh=c17e90dee 89d879ac76cbfea1df423d6&oe=57942C68

https://scontent-sea1-1.xx.fbcdn.net/hphotos-xtf1/v/t1.0-9/1521644_3722228869692_341936589_n.jpg?oh=0738eccb2 d894359d7b5ad67ec49d9ba&oe=574B8073

Looks good.

I haven't jumped into the project full on yet, but working on getting things in order and sourcing what I'll need. Thanks for the quick and quality replies.