PDA

View Full Version : Engine: WTB-2.5 TIII pistons


turbovanmanČ
03-02-2016, 04:34 PM
Might get the van on the road this year, so looking for pistons, .030 or .040 over with .901 or .912 wrist pins IIRC. Its been awhile, :(
jefo
03-02-2016, 04:45 PM
Just curious, what happened to the old ones? Detonation?
glhs727
03-02-2016, 05:24 PM
Might get the van on the road this year, so looking for pistons, .030 or .040 over with .901 or .912 wrist pins IIRC. Its been awhile, :(
if you don't find any here, we have the venolia 2.5 t3 pistons in .020 in stock
turbovanmanČ
03-02-2016, 06:08 PM
Just curious, what happened to the old ones? Detonation?

Where do I start, lol. I had some fueling issues and detonation issues, couldn't figure it out and on a 25 psi pass, was honestly an easy 11 sec run, had a low 11 sec covered at half track by a car length and lost an injector, destroyed one piston and damaged the others, at that point, lost my drive to keep it running so need another set.


if you don't find any here, we have the venolia 2.5 t3 pistons in .020 in stock

Thanks Cindy.