89-90 G,J body or 91+ G,J,P body spindles.

[black86glhs]

Like the title says, looking for these spindles, again. They can be the smaller ATE style with the 10.25" rotor. Basically, looking for spindles with bolt in hubs. Don't really need the 11" brake spindles. Thanks.

[turbovanman²]

I got them, LMK.

Do you want the later model or the early model or do you care?

[black86glhs]

Either one will work. Don't need the hubs unless the are already bolted to the spindle. How much?

[turbovanman²]

What`s your zip

[black86glhs]

Sorry, 44313 Akron, Ohio. The ones from that 90 GTC would be perfect!!!

[turbovanman²]

Sorry, 44313 Akron, Ohio. The ones from that 90 GTC would be perfect!!!

Pretty sure I have another set off but if you want the GTC units, will be a little bit. Need the rears too?

[black86glhs]

It didn't need to be those, just some thing like them. Actually now that I think of it, those would be the larger brakes that I don't really need. I can get 5x100 hubs for the spindles.

[turbovanman²]

They are 5x100. I'll dig up the ones I have and we'll go from there. :nod:

[black86glhs]

They are 5x100. I'll dig up the ones I have and we'll go from there. :nod:Sounds like a plan.:nod:

[black86glhs]

Simon, you get to look at the spindles?

[acannell]

I am parting out a 90 daytona ES. Would these have the right spindles? If so please PM me

[black86glhs]

Bump...still looking for these.

[tryingbe]

I know my local yard have a set of 89 Dynasty spindles/knuckle. Would they work for you?

[ajakeski]

I have a set of bolt on hubs if you need those. The spindles they were attached to are gone.

[black86glhs]

I know my local yard have a set of 89 Dynasty spindles/knuckle. Would they work for you?Thanks Harry, I actually found a 94 shadow in the pull-a-part here in akron. Complete with caliper brackets.


I have a set of bolt on hubs if you need those. The spindles they were attached to are gone.Are they 5x100 or 5x114?

[ajakeski]

5x100. They came from a 1991 Shelby Daytona