Shifter lift collars wanted

[Maddog]

Contact: chuck@maddogsts.com

I have about six '87-'89 Reverse Lockout Shifter Assemblies that are missing the lift collar for the Reverse Lockout feature. Because this part gets a slight modification, and is needed to adjust the length of the collar lift rod, I can't ask a potential customer to use their own lift collar.

So, I need about 6 or more of these pieces. Let me know what you have, and how many.

NOTE: for this to be the correct part, there should be NO threading whatsoever in the ID of the collar.

Side View:
http://img.photobucket.com/albums/v499/MaddogChuck/Misc%20car%20stuff/IMG630_zpszns228wr.jpg (http://smg.photobucket.com/user/MaddogChuck/media/Misc%20car%20stuff/IMG630_zpszns228wr.jpg.html)

Note slotted block inside collar ID:
http://img.photobucket.com/albums/v499/MaddogChuck/Misc%20car%20stuff/IMG631_zpsr2cxyu1u.jpg (http://smg.photobucket.com/user/MaddogChuck/media/Misc%20car%20stuff/IMG631_zpsr2cxyu1u.jpg.html)


Thank you for looking! :)

[rx2mazda]

Looks like a prime candidate for a 3d printed replica.

[Maddog]

Looks like a prime candidate for a 3d printed replica.

You have access?

[ajakeski]

Send me one and I'll see if I can print it.

What's even better is that I'm 15 minutes from you in Kenosha.

[rx2mazda]

You have access?

Yes. Looks like Ajakeski has you covered. Good luck!

[ajakeski]

I'll have to look tomorrow and see if I have an extra shifter. If I do, I'll get started on the 3D model this weekend.