PDA

View Full Version : A568 & 523 CNC machined 4140 bearing support plates



lengel
10-01-2015, 04:30 PM
Ok guys I need a show of hands of who wants one. I will need a minimum of 10 plate sold to get this going. These plates will be fully CNC machined and made of 4140 chromoly steel, and will replace the stock cast aluminum bearing plate. JT and myself have been running the prototypes for the past year. I only have half a dozen passes on my car since the plate was installed, and JT has 20+ passes, and about 1500 + miles on his. I had my trans apart twice over the past year with no issues with this plate. JT didn't get a chance to take his apart yet, but will be after the season is over, and before we start making these. The buyer will need to provide the stock aluminum support plate, so i can remove the shift rod bushing, and install them in the steel plate. buyer will also need to provide a stock steel backing plate (the thin steel plate that is bolted to the aluminum support plate). I will be modifying this by adding two bolt holes and removing the portion over the input shaft all on the CNC. The price is $375.00 + shipping To make things easy on myself, shipping will be a $13 USPS flat rate box, Payment will be made through paypal or a money order. When paying through paypal If you choose NOT to gift the payment you will need to add 3% to your total. I will need a $200 deposit from everybody on the list before any stock is ordered, and the balance will be due upon completion. I think doing a list like in other group buys worked the best. Only put your name on the list if are 100% sure you will be buying one. list info should be your TM screen name, and your actual name.

My shipping address is
Adam Lengel
95 Oak st.
Palmerton, pa 18071

Please ask any questions you may have.

Timeline
Now till 12/1/15 To put your name on the list
12/1/15 till 12/15/15 To pay deposit ($200)
12/15/15 till 12/31/15 Time for myself to order and receive stock.
12/31/15 till 3/1/16 Time to machine all parts
3/1/16 till 3/7/16 week for shipping

http://images.tapatalk-cdn.com/15/10/01/0bbfbd72ad768960217404e71313db62.jpg
http://images.tapatalk-cdn.com/15/10/01/30554c5bf08d7a3ac985e7cb6734f4b0.jpg
http://images.tapatalk-cdn.com/15/10/01/0c8be3e5cdd3f98fcc2a02a29ce2fc7a.jpg
http://images.tapatalk-cdn.com/15/10/01/209572f081e632e07c0b451a4c6623c1.jpg
http://images.tapatalk-cdn.com/15/10/01/31d6490a161864cfcd34b402c62b9ea4.jpg
http://images.tapatalk-cdn.com/15/10/01/79982b346ed10e77dc9fc560144ff7fe.jpg
http://images.tapatalk-cdn.com/15/10/01/73372d554e346922aef7062e280ec5d0.jpg
http://images.tapatalk-cdn.com/15/10/01/b01a23cea0abf8054004a8a8592c8904.jpg
http://images.tapatalk-cdn.com/15/10/01/e9ba6c017b06800e3383777c7ccad84e.jpg
1: glhs727-Cindy Lindsay (deposit paid for 2) (plates received)
2: rx2mazda-Carroll Roberts (paid in full) ( plates received) shipped
3: Pat- Patrick Culkin ( paid in full) (plates received) shipped
4: chargerturbo87-Steve Earsley (paid in full) (plates received) shipped
5: karlak-Karl Akridge (paid in full)
6: 135sohc-Craig Griffin (paid in full)(steel plate received) shipped
7: c2xejk-Edward Kelly (paid in full) (plates received) shipped
8: Ondonti-Brent Seman ( paid in full)(Kyle's plates received)
9: Ondonti-Brent Seman (deposit paid) (plates full)
10: Shadow-Robert Mclellan (paid in full) (plates received) shipped
11: DOHCRT-Vic Dobney (paid in full) (plates received) shipped
12: cjbintx-Chris Baker (paid in full) (plates received) shipped
13: cheezit53-Dominic Manzella (TD) ( paid in full) (plates received) Shipped
14: BadAssPerformance - JT (paid in full) (plates received) shipped
15: BadAssPerformance - JT (paid in full) (plates received) shipped
16: Turbo Joe (paid in full) (plates received) Shipped
17: TAFT CAMS-Nicolaus Kuehn (paid in full) (plates received) Shipped

glhs727
10-01-2015, 05:00 PM
Plate work look awesome!! At what power levels is this plate needed?


Put me down for one, maybe two....

Turbo Joe
10-01-2015, 06:14 PM
must resist buying shiney !! nice work Adam :) I can see me on that list in Nov when my birthday hits:eyebrows:

moparzrule
10-01-2015, 06:57 PM
Wish you were doing this 6 months ago, now my 568 is already rebuilt and back in my car :(

lengel
10-01-2015, 08:09 PM
Plate work look awesome!! At what power levels is this plate needed?


Put me down for one, maybe two....

I really don't know. I know I was seeing sings of mine flexing a lot. JT was cracking them. I also think these will help the bearing race from walking off the main shaft, and that can happen on lower hp cars.


must resist buying shiney !! nice work Adam :) I can see me on that list in Nov when my birthday hits:eyebrows:

Sounds good Joe! See you down at Cecil.


Wish you were doing this 6 months ago, now my 568 is already rebuilt and back in my car :(

It's a turbo dodge It will be out soon! Hope not. Hope to see some good things from your car in the future. ;)

BadAssPerformance
10-02-2015, 12:30 AM
I really don't know. I know I was seeing sings mine flexing a lot. JT was cracking them. I also think these will help the bearing race from walking off the main shaft, and that can happen on lower hp cars.

I agree that it could help reduce the bearing race walk-off issue. I've cracked 4 stock plates. You can also see uneven contact from 4th gear showing the plate is flexing.

5636956370

And some pics of the plate in the car now

56371563725637356374

Hmmm, I might be down for another, need to check funds

135sohc
10-02-2015, 12:59 PM
Just for absolute clarification you are referring to the 4 Teflon/bronze bushings that the shifting rods ride on, those are being pressed out of the old plate and reinstalled into the new one ?

lengel
10-02-2015, 01:12 PM
Just for absolute clarification you are referring to the 4 Teflon/bronze bushings that the shifting rods ride on, those are being pressed out of the old plate and reinstalled into the new one ?

Correct

Reaper1
10-02-2015, 01:33 PM
I am probably going to want in on this...gotta get funds in line...

rx2mazda
10-02-2015, 01:57 PM
Put me on the list. Thanks for doing these

Pat
10-02-2015, 02:09 PM
Ok guys I need a show of hands of who wants one. I will need a minimum of 10 plate sold to get this going. These plates will be fully CNC machined and made of 4140 chromoly steel, and will replace the stock cast aluminum bearing plate. JT and myself have been running the prototypes for the past year. I only have half a dozen passes on my car since the plate was installed, and JT has 20+ passes, and about 1500 + miles on his. I had my trans apart twice over the past year with no issues with this plate. JT didn't get a chance to take his apart yet, but will be after the season is over, and before we start making these. The buyer will need to provide the stock aluminum support plate, so i can remove the shift rod bushing, and install them in the steel plate. buyer will also need to provide a stock steel backing plate (the thin steel plate that is bolted to the aluminum support plate). I will be modifying this by adding two bolt holes and removing the portion over the input shaft all on the CNC. The price is $375.00 + shipping To make things easy on myself, shipping will be a $13 USPS flat rate box, Payment will be made through paypal or a money order. When paying through paypal If you choose NOT to gift the payment you will need to add 3% to your total. I will need a $200 deposit from everybody on the list before any stock is ordered, and the balance will be due upon completion. I think doing a list like in other group buys worked the best. Only put your name on the list if are 100% sure you will be buying one. list info should be your TM screen name, and your actual name.

Please ask any questions you may have.

Timeline
Now till 12/1/15 To put your name on the list
12/1/15 till 12/15/15 To pay deposit ($200)
12/15/15 till 12/31/15 Time for myself to order and receive stock.
12/31/15 till 3/1/16 Time to machine all parts
3/1/16 till 3/7/16 week for shipping

http://images.tapatalk-cdn.com/15/10/01/0bbfbd72ad768960217404e71313db62.jpg
http://images.tapatalk-cdn.com/15/10/01/30554c5bf08d7a3ac985e7cb6734f4b0.jpg
http://images.tapatalk-cdn.com/15/10/01/0c8be3e5cdd3f98fcc2a02a29ce2fc7a.jpg
http://images.tapatalk-cdn.com/15/10/01/209572f081e632e07c0b451a4c6623c1.jpg
http://images.tapatalk-cdn.com/15/10/01/31d6490a161864cfcd34b402c62b9ea4.jpg
http://images.tapatalk-cdn.com/15/10/01/79982b346ed10e77dc9fc560144ff7fe.jpg
http://images.tapatalk-cdn.com/15/10/01/73372d554e346922aef7062e280ec5d0.jpg
http://images.tapatalk-cdn.com/15/10/01/b01a23cea0abf8054004a8a8592c8904.jpg
http://images.tapatalk-cdn.com/15/10/01/e9ba6c017b06800e3383777c7ccad84e.jpg
1: glhs727-Cindy Lindsay
2: rx2mazda-Carroll Roberts
3: Pat - Patrick Culkin
4:
5:
6:
7:
8:
9:
10:

Include me also. Thanks.
1: glhs727-Cindy Lindsay
2: rx2mazda-Carroll Roberts
3: Pat - Patrick Culkin
4:
5:
6:
7:
8:
9:
10:

minigts
10-02-2015, 04:08 PM
I agree that it could help reduce the bearing race walk-off issue. I've cracked 4 stock plates. You can also see uneven contact from 4th gear showing the plate is flexing.

5636956370

And some pics of the plate in the car now

56371563725637356374

Hmmm, I might be down for another, need to check funds

JT, on the new plate, are you showing use of the replacement or is this pre-installation? Just wondering how the wear is on it after use and that pic looks like new.

chargerturbo87
10-02-2015, 05:20 PM
Put me down for 0ne - Steve Earsley

Force Fed Mopar
10-02-2015, 06:48 PM
I am probably going to want in on this...gotta get funds in line...

Yeah same here, making more money now so should be able to funnel a bit off to the side for projects. 2.5 TIII is probably gonna be making some torque ;)

karlak
10-02-2015, 09:24 PM
I will take one. Karl Akridge

BadAssPerformance
10-03-2015, 09:05 AM
JT, on the new plate, are you showing use of the replacement or is this pre-installation? Just wondering how the wear is on it after use and that pic looks like new.

First two pics are of one of the damaged stock aluminum plates and the next pics are of the new CM plate installation. I have not removed it yet for review. I did put 3 more passes on it last night tho.

135sohc
10-03-2015, 12:14 PM
Never see the power to justify this but I like the idea of strengthening the case regardless.

Include me also. Thanks.
1: glhs727-Cindy Lindsay
2: rx2mazda-Carroll Roberts
3: Pat - Patrick Culkin
4:
5:
6: 135sohc- Craig Griffin
7:
8:
9:
10:

c2xejk
10-05-2015, 12:57 PM
These will work with the 543, correct?

Thanks.

1: glhs727-Cindy Lindsay
2: rx2mazda-Carroll Roberts
3: Pat - Patrick Culkin
4:
5:
6: 135sohc- Craig Griffin
7: c2xejk - Edward Kelly
8:
9:
10:

lengel
10-05-2015, 02:24 PM
These will work with the 543, correct?

Thanks.

1: glhs727-Cindy Lindsay
2: rx2mazda-Carroll Roberts
3: Pat - Patrick Culkin
4:
5:
6: 135sohc- Craig Griffin
7: c2xejk - Edward Kelly
8:
9:
10:

I Just asked Jackson to be sure that they share the same plate. Yes they will work in a 543.

minigts
10-05-2015, 02:53 PM
I Just asked Jackson to be sure that they share the same plate. Yes they will work in a 543.

525 as well? :D ;)

lengel
10-05-2015, 07:42 PM
525 as well? :D ;)

Haha.! Nope will not work on a 525! You still running that 525?

Ondonti
10-05-2015, 11:46 PM
[COLOR=#333333]
1: glhs727-Cindy Lindsay
2: rx2mazda-Carroll Roberts
3: Pat- Patrick Culkin
4: chargerturbo87-Steve Earsley
5: karlak-Karl Akridge
6: 135sohc-Craig Griffin
7: c2xejk-Edward Kelly
8: Ondonti -Brent Seman
9: Ondonti -Brent Seman
10:

Already have a spare plate from Asa sitting in a box. That was a winning purchase. Can I get the plate back?
Kinda want a third but not sure what for. Hoarding? Wish I bought more shifter plate pads
Price is easier to swallow then I figured. One Is for someone else.

Any alternatives to sending plates? I already have one request to help supply plates and I think I might get one more request. Don't really want ti tear down that many transmissions. I don't date transmissions for a week like JT or have people around who have them.

lengel
10-06-2015, 08:29 AM
Yes the stock aluminum plate would be sent back with the new CM plate.

I didnt really look into any alternative. I'll see if I can get a part # and check with a dealer on there availability. If some doesn't have a stock plate to send in, I can just send the CM plate out and the buyer can remove and install the bushings when they install the new CM plate.

Shadow
10-06-2015, 09:26 AM
1: glhs727-Cindy Lindsay
2: rx2mazda-Carroll Roberts
3: Pat- Patrick Culkin
4: chargerturbo87-Steve Earsley
5: karlak-Karl Akridge
6: 135sohc-Craig Griffin
7: c2xejk-Edward Kelly
8: Ondonti -Brent Seman
9: Ondonti -Brent Seman
10: Shadow - Robert Mclellan

I'm in as well.

minigts
10-06-2015, 09:56 AM
Haha.! Nope will not work on a 525! You still running that 525?

Of course. I'm trying to bring back the trend. :)

DOHCRT
10-06-2015, 12:38 PM
1: glhs727-Cindy Lindsay
2: rx2mazda-Carroll Roberts
3: Pat- Patrick Culkin
4: chargerturbo87-Steve Earsley
5: karlak-Karl Akridge
6: 135sohc-Craig Griffin
7: c2xejk-Edward Kelly
8: Ondonti -Brent Seman
9: Ondonti -Brent Seman
10: Shadow - Robert Mclellan
11: DOHCRT - Vic Dobney

Me Too...

Reaper1
10-06-2015, 03:16 PM
Yes the stock aluminum plate would be sent back with the new CM plate.

I didnt really look into any alternative. I'll see if I can get a part # and check with a dealer on there availability. If some doesn't have a stock plate to send in, I can just send the CM plate out and the buyer can remove and install the bushings when they install the new CM plate.

On this note, it's part of the reason I haven't put my name on the list as I don't have immediate access to a plate to send you. I am perfectly capable of installing bushings, etc. As long as the machining is finished, installing bushings or the oiling trough, etc is easy.

lengel
10-06-2015, 03:27 PM
Yes the bushing install every easily. The only thing you will need to do after installing the bushing is pean the metal over on the one side of the hole, so the bushing can't push out. I just used a center punch for this.
You still will need to send me the thin steel backing plate. If Anyone needs one of these Jackson said he has a stack of them. So I would contact him if you need one.
http://images.tapatalk-cdn.com/15/10/06/b5fdc19a225d0b9a501b17b541108f8b.jpg

135sohc
10-07-2015, 06:43 AM
How about Loctite bearing mount ?

lengel
10-07-2015, 12:23 PM
How about Loctite bearing mount ?

Yeah that should work, but I'm not going to suggest it just because I have not tried it.

Reaper1
10-07-2015, 02:16 PM
The green Loctite (I think that's what's being referred to here) is the shiznizzle! It's used for cylinder liners on diesels too if I'm not mistaken.

135sohc
10-07-2015, 08:57 PM
The green Loctite (I think that's what's being referred to here) is the shiznizzle! It's used for cylinder liners on diesels too if I'm not mistaken.

There are multiple flavors of bearing mount compound but yes generically 'that stuff' is what I'm referring to. I have used it a few times and become a believer in its capabilities.

Ondonti
10-11-2015, 04:22 AM
On this note, it's part of the reason I haven't put my name on the list as I don't have immediate access to a plate to send you. I am perfectly capable of installing bushings, etc. As long as the machining is finished, installing bushings or the oiling trough, etc is easy.

Time for us to go hunting? Not sure what you want to run in the end or if you will be sitting on the plate. If you sit on it, its not gonna go bad.

Reaper1
10-11-2015, 04:58 AM
I'm still a 3.0 guy, remember! Gotta find a way to make the A543 live! Though I don't plan to punish it as much as the A555 ;)

cjbintx
10-28-2015, 09:08 AM
Nice work! With this now, I'm glad I haven't yet put in the shift fork pads and quaife yet. Go ahead and put me down for one! I'll put it on the card if I have to. :)

1: glhs727-Cindy Lindsay
2: rx2mazda-Carroll Roberts
3: Pat- Patrick Culkin
4: chargerturbo87-Steve Earsley
5: karlak-Karl Akridge
6: 135sohc-Craig Griffin
7: c2xejk-Edward Kelly
8: Ondonti -Brent Seman
9: Ondonti -Brent Seman
10: Shadow - Robert Mclellan
11: DOHCRT - Vic Dobney
12: cjbintx - Chris Baker

Ondonti
10-31-2015, 02:19 PM
So we just need to supply a support plate with sleeves and a the steel backing plate. We can install our own oil thingamabob etc.

Where are we shipping this to? PM only?
I am VERY distracted right now and I am going to forget.

lengel
10-31-2015, 09:44 PM
So we just need to supply a support plate with sleeves and a the steel backing plate. We can install our own oil thingamabob etc.

Where are we shipping this to? PM only?
I am VERY distracted right now and I am going to forget.

Yes just the two plates will need to be sent to me at the time of deposits. You can tap out the oil feeder with a hammer to make shipping of the plates easier. Then you can simply tap it back into the new plate. The new steel plate has a locating notch just like the stock plate so there is no chance orientation issues when installing the oil feeder.

Ondonti
11-04-2015, 02:38 PM
Yes just the two plates will need to be sent to me at the time of deposits. You can tap out the oil feeder with a hammer to make shipping of the plates easier. Then you can simply tap it back into the new plate. The new steel plate has a locating notch just like the stock plate so there is no chance orientation issues when installing the oil feeder.

I looked through again and you won't be doing payment until the first two weeks of December. When should items we are shipping you arrive? Have to see if I can get some of them from Canada or tear up one of mine.

lengel
11-04-2015, 05:15 PM
I looked through again and you won't be doing payment until the first two weeks of December. When should items we are shipping you arrive? Have to see if I can get some of them from Canada or tear up one of mine.

You can send them to me whenever you want. As long as I have them all by 1/1/16 I will put my shipping address in the first post.

BadAssPerformance
11-04-2015, 10:41 PM
1: glhs727-Cindy Lindsay
2: rx2mazda-Carroll Roberts
3: Pat- Patrick Culkin
4: chargerturbo87-Steve Earsley
5: karlak-Karl Akridge
6: 135sohc-Craig Griffin
7: c2xejk-Edward Kelly
8: Ondonti -Brent Seman
9: Ondonti -Brent Seman
10: Shadow - Robert Mclellan
11: DOHCRT - Vic Dobney
12: cjbintx - Chris Baker
13: BadAssPerformance - JT
14: BadAssPerformance - JT

cjbintx
12-02-2015, 12:01 AM
DP sent. Will have the plate to you as soon as I can get it off. Thanks!

lengel
12-03-2015, 12:46 AM
Ok guys i just sent out pms regarding deposits, so if your on the list and didnt get a pm let me know.

Thanks Adam

c2xejk
12-03-2015, 07:35 AM
Deposit sent!

chargerturbo87
12-04-2015, 03:55 AM
Adam,
$200 (gifted) deposit sent
steve

Ondonti
12-10-2015, 01:03 AM
Looked at the parts I planned on sending and one of the bushings is damaged :(

rx2mazda
12-12-2015, 10:34 AM
Deposit sent!

cheezit53
12-16-2015, 12:59 PM
I havent recived a pm yet.

lengel
12-16-2015, 01:12 PM
I havent recived a pm yet.

I sent you a pm over on TD since you contacted me on that forum. You got the same pm on TD that everybody else got. If you look on the list in the first post it will show that you paid your deposit behind your name.

Adam

- - - Updated - - -

Spiritman
12-16-2015, 03:40 PM
did u get my pm?

Turbo Joe
12-16-2015, 07:05 PM
Adam, sorry I spaced this out but if it's not too late, put me on that list please.

cheezit53
12-16-2015, 10:48 PM
I sent you a pm over on TD since you contacted me on that forum. You got the same pm on TD that everybody else got. If you look on the list in the first post it will show that you paid your deposit behind your name.

Adam

- - - Updated - - -

Gotcha. The one from last week.:thumb:

lengel
12-29-2015, 03:57 PM
Stock is ordered and on its way. Should arrive 1/6/16

c2xejk
01-10-2016, 08:56 PM
On the stock plate, do we need to remove the bearing race and oil trough?

lengel
01-10-2016, 09:33 PM
On the stock plate, do we need to remove the bearing race and oil trough?

No need to remove the race. Remove and keep the oil feeder. Oil feeder taps out very easy with a hammer, and will make shipping easier.

Adam

lengel
01-12-2016, 11:47 AM
Some metal showed up yesterday!
http://images.tapatalk-cdn.com/16/01/12/edc532431abcc07cb08fc34082d7bb3f.jpg

lengel
01-13-2016, 09:55 AM
A few people on the list have not sent the plates to me yet. I have marked behind your name on the list in the first post if I received your plate. I will need all the plates no later then 2/5/16. I will be setting up the cnc that weekend to modify the stock thin steel plate. If I don't have your plates by that date, I have set the cnc again and you will be charged a $20 set up fee.

135sohc
01-13-2016, 08:50 PM
The excuse list is getting short enough I suppose its time to buy the quaife for when this work of art shows up in the mail.

rx2mazda
01-13-2016, 08:56 PM
A few people on the list have not sent the plates to me yet. I have marked behind your name on the list in the first post if I received your plate. I will need all the plates no later then 2/5/16. I will be setting up the cnc that weekend to modify the stock thin steel plate. If I don't have your plates by that date, I have set the cnc again and you will be charged a $20 set up fee.

Can I just send you my whole transmission and you rebuild it with the plate? Win - win.

Turbo Joe
01-14-2016, 12:21 AM
Can I just send you my whole transmission and you rebuild it with the plate? Win - win.
why didn't I think of that
57160

BadAssPerformance
01-14-2016, 10:32 PM
Some metal showed up yesterday!
http://images.tapatalk-cdn.com/16/01/12/edc532431abcc07cb08fc34082d7bb3f.jpg

Glad the steel finally made it there! Those look nicer than the first ones used for Prototypes! LOL!

lengel
01-16-2016, 12:23 AM
Can I just send you my whole transmission and you rebuild it with the plate? Win - win.


why didn't I think of that
57160

Depends on what your definition of "rebuild" is. I can install the new plate, replace any parts you would like, and reshim it for $250+ parts+shipping


Glad the steel finally made it there! Those look nicer than the first ones used for Prototypes! LOL!

Thanks again JT! Yeah I think these pieces will machine a little better then the prototypes! ;)

BadAssPerformance
01-16-2016, 04:10 PM
Thanks again JT! Yeah I think these pieces will machine a little better then the prototypes! ;)

I hope so!

cheezit53
01-17-2016, 10:43 PM
Boxing my plates up tonight.:)

DOHCRT
01-19-2016, 11:39 PM
Sent my plate out today...

Thanks Adam!!

Turbo Joe
01-20-2016, 02:17 PM
tried to reply to a pm, your inbox is full lol ....
Update: went thru my spare casing box and the steel plate is missing.. if anyone has a spare pm me or post here please, gonna try and find one but will probably make a wanted post..

lengel
01-20-2016, 09:27 PM
Boxing my plates up tonight.:)


Sent my plate out today...

Thanks Adam!!

Sounds good!


tried to reply to a pm, your inbox is full lol ....
Update: went thru my spare casing box and the steel plate is missing.. if anyone has a spare pm me or post here please, gonna try and find one but will probably make a wanted post..
Cleared some pm out. I do have a few stock thin steel plates. If you would like one I can add $15 to your balance.

Turbo Joe
01-21-2016, 02:51 AM
Thanks Adam, but Jackson bailed me out and is going to send you one for me along with some others I guess? What an awesome guy ! I'll get the aluminum piece shipped out tomorrow.

lengel
01-21-2016, 10:15 AM
Thanks Adam, but Jackson bailed me out and is going to send you one for me along with some others I guess? What an awesome guy ! I'll get the aluminum piece shipped out tomorrow.

Sounds good! Glad you found one!

Lotashelbys
01-21-2016, 02:51 PM
Plates and housings sent out for Carroll,Joe,Nic. Hea ding your way Adam. For the record I am out of trans cases to steal the aluminum bearing housing off of. So I can't send anymore for anyone else

rx2mazda
01-21-2016, 09:24 PM
Thanks Loser!

lengel
02-06-2016, 09:35 PM
Making progress! Last one.
http://images.tapatalk-cdn.com/16/02/06/872c19183a99436f7fcec9bc60844482.jpg

Turbo Joe
02-06-2016, 09:57 PM
Oooo Oooo , I see mine :) lmao

lengel
02-08-2016, 07:10 PM
Putting work in :)
http://images.tapatalk-cdn.com/16/02/08/3584714ff720901519ee2c4d777389cb.jpg

Turbo Joe
02-08-2016, 10:05 PM
WOW someone has been busy ! We appreciate all the hard work you do :) Thanks for helping out the community, BTW I never did run into you at Cecil...that I know of.....my mind was spinning like my tires were..lol

lengel
02-09-2016, 09:16 AM
WOW someone has been busy ! We appreciate all the hard work you do :) Thanks for helping out the community, BTW I never did run into you at Cecil...that I know of.....my mind was spinning like my tires were..lol

Tell me about it. Longest weekend of my life! Haha

I was at Cecil, but without my car. I took my 4 year old son with, so we only were
there for 3 hours, and most of those 3 hours we were right next to the water box so he could watch the burn out. :)

c2xejk
02-09-2016, 01:56 PM
Very Nice!!

135sohc
02-13-2016, 02:50 PM
Received mine yesterday. Very nice piece !

c2xejk
02-13-2016, 03:06 PM
Just paid the remainder!

Turbo Joe
02-13-2016, 11:02 PM
If there are people that need this plate ASAP, you're all welcome to get yours before me. I'm not taking apart my trans right now... too much other "to do stuff" first, so I can wait for mine Adam :) and just let me know what I owe for a balance when time comes , thanks man you rock !

lengel
02-15-2016, 09:43 PM
If there are people that need this plate ASAP, you're all welcome to get yours before me. I'm not taking apart my trans right now... too much other "to do stuff" first, so I can wait for mine Adam :) and just let me know what I owe for a balance when time comes , thanks man you rock !

Thats nice of you to offer that Joe, but all the plates are done, so no one will need to wait. :)

cheezit53
02-19-2016, 07:43 AM
Just got mine. Nice work Adam.

Pat
02-19-2016, 04:46 PM
Mine arrived also. Can't wait to use it!

Turbo Joe
02-20-2016, 03:02 AM
mine arrived the other day.. still in the sealed box..lol been busy.

BadAssPerformance
02-20-2016, 12:20 PM
Mine arrived too. Look as good or better than the prototype! :thumb:

c2xejk
02-20-2016, 03:19 PM
Mine arrived several several days ago. Looks good. Now I need find time to install it! Nice work.

lengel
02-20-2016, 07:45 PM
Nice!!! Glad you guys are happy with them!

Adam

Ondonti
12-03-2016, 04:00 PM
How many have installed? I have done nothing with my fun car.