Upper strut bearing mounts

[mopar-tech]

55727

What are people using for upper mounts on P/K/G/H bodies? I suspect one of the ones I have is junk as it makes noise.

Which brand or part number seems to be the best? Most of the stuff being made for our cars looks like trash now.

[tryingbe]

I bought Rich's bearing plate for my Koni coilover setup because I do not want to deal with those cheap rubber mount.

http://rbryant.freeshell.org/bc_coilovers.htm

I don't know if they work with stock springs.

[mopar-tech]

Just need something stock, nothing crazy.

[thedon809]

Might still be available from the dealer. Doubtful, but it might. I was able to get (nos) wheel bearings for my omni so maybe they have strut mounts.

[mopar-tech]

Might still be available from the dealer. Doubtful, but it might. I was able to get (nos) wheel bearings for my omni so maybe they have strut mounts.

I'll give a few folks a call this morning.

Just checked my parts book, interesting. 87 P-body is listed as a seperate part number for some reason.

4322760 2 KJGHE BEARING, w/Mount Frt. Susp. Strut Dmpr.
4404977 2 P

1988 is listed as being all the same. Very interesting. Seat is the same part number from 87-88.

[supercrackerbox]

I have Monroes on the Daytona and Charger, mostly because I get a 50% reimbursement from work for buying Tenneco products. No issues to date.

[mopar-tech]

I was thinking the Monroe one as well just because brand name.

http://www.rockauto.com/catalog/moreinfo.php?pk=61284&cc=1097759&jnid=476&jpid=7

Might get the seat too even though mine look to be in good shape.

http://www.rockauto.com/catalog/moreinfo.php?pk=61425&cc=1097759&jnid=476&jpid=1