View Full Version : Engine: rear cam cover
jonymopar
07-15-2015, 01:02 AM
I had a small engine fire in my 1985 daytona turbo, I need the rear cam cover, NOT THE CAP LIKE ON THE LATER MODELS thanks..
GLHS60
07-15-2015, 01:49 AM
This is the Chrysler part # 4298087
Marty Mopar has them listed for $30.00
Thanks
Randy
jonymopar
07-17-2015, 09:10 AM
How do I find marty mopar
GLHS60
07-17-2015, 09:26 AM
www.arizonaparts.com
Looks like he's away for a while
Thanks
Randy
spmppm
07-21-2015, 09:39 AM
Email me a picture or just email and I'll send picture of what I have. stevemenzner@gmail.com
jonymopar
07-21-2015, 11:59 PM
ok my email is jonymopar@aol.com thanks.
Chris W
07-22-2015, 01:46 AM
I had a small engine fire in my 1985 daytona turbo, I need the rear cam cover, NOT THE CAP LIKE ON THE LATER MODELS thanks..
The cam button?
55676
If that's what you are looking for we have these in stock. $6.00 http://turbosunleashed.com/shop/buttons-p-315.html
Chris-TU
mopar-tech
07-22-2015, 04:43 AM
55677
The cam button?
Nope.
The early turbo motors had a plastic cover that went from valve cover stud to valve cover stud to hide the end of the camshaft.
As an aside, the rear seal on those early turbo and carb motors were reverse rotation and are different from the seals at the front of the motor.
jonymopar
07-22-2015, 07:41 PM
no not the button the full cover,.
Dr. Johny Dodge
07-23-2015, 11:28 AM
I found your end cover in a bucket of parts the night before last
if you want to cover postage outta toronto you can have it
I can't do anything about mailing it out until the end of the month as I'm just to ### broke to do much of anything at the moment but if you wanna PM me a mailing addy I can get the cost of postage worked out in a day or two
I had a quick look see at it when I saw it as I remembered you're lookin for it
the mount tabs are still good , not deformed from overtightening but it's still coated in grunge so I'd have to give it a good cleaning to know if it's scuffed badly though there was no damage to note looking at it briefly in passing
- - - Updated - - -
I presume you're good for the studs and nuts ?
- because those are in a can in the bucket with the cover and you can have those too if ya need 'em
jonymopar
07-28-2015, 03:19 PM
ok cool I will get you my work addy,
Dr. Johny Dodge
07-28-2015, 03:34 PM
got your pm
I'll try to get a postage cost tommorow
jonymopar
08-04-2015, 05:09 PM
no rush when ever you get a chance,
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.