View Full Version : General: Procharged the Jeep and need a blow off valve that will hold
guyd_15
06-10-2015, 09:16 PM
After all the time I spent here, I thought this would be the go to place!!! I know many of you run high boost and the stinking Procharger valve starts leaking at about 5-6lbs. I need something that will hold 10lbs or so.
And yeah I still have the Glh-t and the both Minis the single cam and the T3.
Haven't been feeling that well lately, just wish I'd get that stinking liver transplant. If the liver doesn't kill me this damn waiting will.
So if you've got something let me know. No you got me wrong not a whole liver just a blow off valve!!!!:thumb:
Guy Douglas
tryingbe
06-10-2015, 09:23 PM
MAP or MAF sensor?
guyd_15
06-10-2015, 09:34 PM
2 bar map
tryingbe
06-10-2015, 09:40 PM
Is this what you're using now?
http://www.ebay.com/itm/99-05-01-02-03-saab-9-5-9-3-2-3-3-0-oem-turbo-charger-blow-off-valve-0280142110-/261110365477?hash=item3ccb63fd25&vxp=mtr
guyd_15
06-10-2015, 09:58 PM
Trying, this is the valve I'm using
http://www.ebay.com/itm/PROFLO-BULLET-BYPASS-VALVE-OPEN-/370895378263?hash=item565b165757&vxp=mtr
guyd_15
06-10-2015, 10:03 PM
They seem to know they have a problem and the've offered this as the cure all for the problem.
http://www.ebay.com/itm/ProCharger-3FASS-007-Race-Bypass-Valve-Enclosed-w-Steel-Flange-/271652496786?pt=LH_DefaultDomain_0&hash=item3f3fc02592
tryingbe
06-10-2015, 10:03 PM
What size od on the inlet?
guyd_15
06-10-2015, 10:08 PM
1 1/4"
- - - Updated - - -
1 1/2" on the cureall
Aries_Turbo
06-10-2015, 10:31 PM
is there a way to modify the procharger valve to stay shut?
make a flange to use a modded DSM valve?
brian
guyd_15
06-10-2015, 10:56 PM
is there a way to modify the procharger valve to stay shut?
make a flange to use a modded DSM valve?
brian
Brian, I was just looking at the valve and its not stamped like the Mitsu so I cant add pressure to the back side. However I think it can definitely make an adapter to run the bosch valve.
Tommorrow I'll take the procharger valve apart to see what kinds of mods might be possible.
Aries_Turbo
06-10-2015, 10:58 PM
Cool. Hope it works out.
I bet they are putting pressure under the diaphragm to help it lift.
tryingbe
06-11-2015, 12:55 AM
I have an industrial size (HUGE) old school HKS BOV, if you're interested send me a PM. Looks to be a NOS, it is quiet but it will move lots of air.
Here's a comment someone made.
http://honda-tech.com/forced-induction-16/hks-racing-bov-196026/
1.5 inch inlet/outlet.
http://www.thelostartof.net/tryingbe/forsale/hks/photo%201.jpg
http://www.thelostartof.net/tryingbe/forsale/hks/photo%202.jpg
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.