P Body upper door trim

[cordes]

Can you get the clips that go into the channel of the black trim that goes above the window? My trim piece looks good, but the clips are broken and I those to reinstall it obviously.

[mopar-tech]

Can you get the clips that go into the channel of the black trim that goes above the window? My trim piece looks good, but the clips are broken and I those to reinstall it obviously.

Something I was going to look into as I have one or two that are in poor shape.

[ajakeski]

I found clips that worked at the local Bumper To Bumper auto parts store.

[ajakeski]

I found clips that worked at the local Bumper To Bumper auto parts store. I'll look and see if I have the part number.

[mopar-tech]

I found clips that worked at the local Bumper To Bumper auto parts store. I'll look and see if I have the part number.

Any luck?

[ajakeski]

Not yet, Lots of boxes to go through.

[ajakeski]

Autoboy master by Auveco Part number PM41092

They list the clips as being for GM, but they worked on our CSX-T

[cordes]

I'm pretty sure these are the same. I ordered a package. If anyone needs some (Gary) just let me know. I know that I don't need 50 of them.

http://www.amazon.com/Quarter-Belt-Reveal-Moulding-Clip/dp/B0045OTBRA/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1433027801&sr=1-1-catcorr&keywords=Quarter+Belt+Reveal+Moulding+Clip

What are people doing for the adhesive on the trim?

[mopar-tech]

I'm pretty sure these are the same. I ordered a package. If anyone needs some (Gary) just let me know. I know that I don't need 50 of them.

http://www.amazon.com/Quarter-Belt-Reveal-Moulding-Clip/dp/B0045OTBRA/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1433027801&sr=1-1-catcorr&keywords=Quarter+Belt+Reveal+Moulding+Clip

What are people doing for the adhesive on the trim?

I'll need a handful, I know the driver side is shot and I might as well do the passenger side too so I can paint the pieces proper.

[cordes]

I'll need a handful, I know the driver side is shot and I might as well do the passenger side too so I can paint the pieces proper.

I'll just send you enough to do a car then. I know there aren't more than 25 per car.

[ajakeski]

I'm pretty sure these are the same. I ordered a package. If anyone needs some (Gary) just let me know. I know that I don't need 50 of them.

http://www.amazon.com/Quarter-Belt-Reveal-Moulding-Clip/dp/B0045OTBRA/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1433027801&sr=1-1-catcorr&keywords=Quarter+Belt+Reveal+Moulding+Clip

What are people doing for the adhesive on the trim?

Those look the same as the ones I used.

For trim adhesive 3M is the way to go.

http://www.autopia-carcare.com/3m-super-strong-attachment-tape.html?productid=3m-super-strong-attachment-tape&channelid=FROOG&utm_source=CSEs&utm_medium=GoogleProductSearch&utm_campaign=CSE&gclid=Cj0KEQjwv6WrBRD4gbngqe7mosYBEiQAIB5oTP1r-i3powYB8mwsw1w2RgLzH0Tv3ne_WA-YXmNkM60aAid48P8HAQ#.VWpymHA8KrU

[Fox]

if anyone knows where to get replacements for the lower rear quarter window round push button type clips i need those

[cordes]

Those look the same as the ones I used.

For trim adhesive 3M is the way to go.

http://www.autopia-carcare.com/3m-super-strong-attachment-tape.html?productid=3m-super-strong-attachment-tape&channelid=FROOG&utm_source=CSEs&utm_medium=GoogleProductSearch&utm_campaign=CSE&gclid=Cj0KEQjwv6WrBRD4gbngqe7mosYBEiQAIB5oTP1r-i3powYB8mwsw1w2RgLzH0Tv3ne_WA-YXmNkM60aAid48P8HAQ#.VWpymHA8KrU

Thanks a ton for the link. I found it on Amazon with a 15' length for less than $10 shipped.

http://smile.amazon.com/3M-03614-Scotch-Mount-Molding-Tape/dp/B002JOVUO0/ref=sr_1_2?ie=UTF8&qid=1433044590&sr=8-2&keywords=3M+Super+Strong+Automotive+Attachment+Tap e+-+03609

[cordes]

The trim clips came in the mail today. While not 100% exactly the same I think they should do the job with no issues at all. Gary, I'll try to get yours out to you when my wife goes to the PO next.

[mopar-tech]

The trim clips came in the mail today. While not 100% exactly the same I think they should do the job with no issues at all. Gary, I'll try to get yours out to you when my wife goes to the PO next.

Thanks! I pulled my trim off today and all the clips exploded of course. Its going off to the body shop after work and I'll have the car back next Friday and spend the weekend screwing it back together.

[cordes]

Those look the same as the ones I used.

For trim adhesive 3M is the way to go.

http://www.autopia-carcare.com/3m-super-strong-attachment-tape.html?productid=3m-super-strong-attachment-tape&channelid=FROOG&utm_source=CSEs&utm_medium=GoogleProductSearch&utm_campaign=CSE&gclid=Cj0KEQjwv6WrBRD4gbngqe7mosYBEiQAIB5oTP1r-i3powYB8mwsw1w2RgLzH0Tv3ne_WA-YXmNkM60aAid48P8HAQ#.VWpymHA8KrU

How think is the stuff you linked to or ended up using? The stuff I got in the mail is relatively thin and the stuff that was on it was really puffy. I'm afraid it will sit too low in the channel of the trim piece to make contact with the door.

[ajakeski]

The tape in the link is what I use. If it's too thin, ues two layers.

[cordes]

The tape in the link is what I use. If it's too thin, ues two layers.

Sweet. So long as I can use two layers there is no way this stuff won't work. The stuff I have looks just like what you linked to but it's longer. I hope to have this back on the car today.

[cordes]

Just finished reinstalling the trim. It looks way better than it did before removal, although it still leaves a little to be desired where it meets the bottom piece near the mirror. That's due to some careless removal in the past if I had to guess though. The clips and tape worked well. I ended up using three layers of the tape which I'm pretty sure was unnecessary.

I hope to have your clips out tomorrow or Saturday Gary.

[mopar-tech]

I hope to have your clips out tomorrow or Saturday Gary.

Thanks, I just finished painting the two pieces off the top of the doors. Need to work on the sweeps tomorrow.