PDA

View Full Version : Interior: Shadow dash bezel and rear window fixed "latch"



mopar-tech
05-03-2015, 08:43 PM
Updated list-


1) Need s single metal clip from a p-body lower dash cover (there is 5 total holding the piece on) the same clip is used on Spirits for the headlamp switch bezel.

2) underhood lamp, same as Daytona and Lancer perhaps?

Gary Donovan

ajakeski
05-05-2015, 02:22 PM
I probably have those. I'll look tmorrow and let you know.

mopar-tech
05-05-2015, 03:44 PM
Thanks!

2manyturbos
05-05-2015, 08:15 PM
If ajakeski doesn't, I have a good dash bezel and nos. (fixed latch). P.M. if interested

ajakeski
05-06-2015, 07:32 PM
Here is photo of the bezel. It's from a CSX -T for added authenticity.
Unfortunatly I dont have the window doodads.
I sent you a PM.

mopar-tech
05-10-2015, 05:46 AM
Looking for a coolant reserve tank, a windshield washer tank with low fluid sensor, hood to cowl seal that runs across the back of the engine bay and a good windshield mounted day/night mirror.

Gary

wheming
05-10-2015, 06:17 AM
You want to try some minivan window latches so you can have opening rear windows? Looks about the same. I have a couple extra.

mopar-tech
05-10-2015, 06:26 AM
You want to try some minivan window latches so you can have opening rear windows? Looks about the same. I have a couple extra.

Nope, I think it is actually covered (pending deal) but the backup plan is to make some from aluminum if need be.

raccoon
05-10-2015, 08:23 AM
ive got the bracket and nuts, whats the reserve tank look like? ill go check, ill have it all.

mopar-tech
05-10-2015, 08:33 AM
ive got the bracket and nuts, whats the reserve tank look like? ill go check, ill have it all.

Bracket?

Coolant tank is missing so don't have an answer there. Pretty sure it is the same for TBI/Turbo I though.

I tried looking up an interchange with other vehicles (Daytona/Lancer) but without luck.

I attached a picture from a vehicle that was on Ebay for a frame of reference.

ajakeski
05-10-2015, 08:57 AM
Lancer and LeBaron washer tanks will work in your CSX.

2manyturbos
05-10-2015, 09:43 AM
Gary,
I'll just send you a bigger box and add the washer tank w/fluid sensor, and the cowl seal. What I found with the coolant bottles is lot's will work with the stock p-body radiator ic set up but, some leave more air gap between bottle and ic reducing heat soak to the ic.
Andrew

mopar-tech
05-14-2015, 06:07 AM
All set aside from a lower dash cover or just a clip if anyone has a spare.

I'll epoxy or fill the holes in the current one and paint to match.

I have a line on a parts car but not optimistic, that would sure help speed things up.

mopar-tech
05-19-2015, 08:34 PM
Updated first post, thanks!

Radiant_Red
05-21-2015, 10:29 PM
I'm parting my 91 shadow Gary lmk what's needed I can give you them at sdac

mopar-tech
06-18-2015, 05:43 AM
updated first post.

martin kolner
06-18-2015, 01:57 PM
4221150 is the under hood lamp. shows up in the 87 and 94 Shadow part book. I have 26 of them NOS. 26.00 each plus shipping

4221150 is for 1983-94 years

4221008 is for 1981-89 years have lots of these NOS also

since the years overlap the part number must vary depending on year and model application

www.arizonaparts.com