So I got an NOS sunroof seal for the GLHS . . .

[supercrackerbox]

I picked up an NOS Mopar seal for the sunroof on the GLHS, the fuzzy one that goes around the glass itself. Looking it over, I have no clue how to replace it. Does anyone know the procedure? Luckily I do have an extra piece of glass to play with if needed.

[minigts]

You just pull the old out and carefully insert the new one. I had issues when replacing the factory one. It was thicker than the one I had, so it ended up bending and not fitting right and was junk in less than a year. I would ensure the edge that fits in the groove is flush against the glass and then put the sunroof in and don't open it for a while to let it fit in the form it should be and sorta "bake" that way, if that makes sense. Just pull the old one out and you'll understand how it fits in.

Just found this link! Going to see if there are some part numbers and see if I can get this stuff ordered, assuming it's correct.

http://www.capitalseating.co.uk/productlist.asp?type=s&view=range&rid=61&mid=2