View Full Version : Engine misfire problem
glhs875
01-16-2015, 05:25 PM
My 2004 SRT4 developed an ignition miss. Tracked it down to the MSD coil arching against the valvecover. Put a stock coil back on. Problem solved!
I seem to remember having this problem once with a 'regular' neon.
shadow88
01-17-2015, 02:09 AM
I honestly thought I read that the MSD coil packs were just factory ones painted red. I heard the part number on the underside was the factory MoPar number.
That could be a big reason why both could have had the same problem.
glhs875
01-17-2015, 09:09 AM
I honestly thought I read that the MSD coil packs were just factory ones painted red. I heard the part number on the underside was the factory MoPar number.
That could be a big reason why both could have had the same problem.
I still have the MSD coil. I will look for a MOPAR part number.
contraption22
01-17-2015, 06:00 PM
The MSD coils are inferior to the OE coils.
shadow88
01-19-2015, 09:39 AM
I also heard the msd's were actually chrysler rejects. But that may be pushing it. Still waiting to see if they're the same Chrysler part number...
glhs875
01-19-2015, 01:15 PM
I also heard the msd's were actually chrysler rejects. But that may be pushing it. Still waiting to see if they're the same Chrysler part number...
I see no OEM part number on the MSD coil. I will not be using another one in the future. The engine seems to run better with a stock coil even well before the MSD coil went bad!
rich tideswell
01-20-2015, 09:30 AM
early on (8 years ago???) the aftermarket coils were known for their poor quality.
if you want an ignition upgrade, convert to coil on plug using 2.7l coils from an Intrepid, or Caliber coils (physically smaller than 2.7l coils)
shadow88
01-20-2015, 10:00 AM
Thanks for clearing that up! No pun intended
glhs875
01-20-2015, 10:55 AM
early on (8 years ago???) the aftermarket coils were known for their poor quality.
if you want an ignition upgrade, convert to coil on plug using 2.7l coils from an Intrepid, or Caliber coils (physically smaller than 2.7l coils)
That is something to think about!
rich tideswell
01-20-2015, 12:48 PM
http://forums.neons.org/viewtopic.php?f=46&t=384869&hilit=coil+on+plug
http://forums.neons.org/viewtopic.php?f=18&t=391309&p=3279709&hilit=coil+on+plug#p3279709
rich tideswell
01-20-2015, 12:55 PM
http://rbryant.freeshell.org/dohc_conversion_products.htm
http://forums.neons.org/viewtopic.php?f=18&t=372181&hilit=coil+on+plug
contraption22
01-22-2015, 11:31 AM
Its unlikely that the MSD are rejected Chrysler coils as they are molded in red plastic while the OE's are black.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.