Ported 2 piece intake

[moparzrule]

Sold!


Date: 01st January 2015
Username: moparzrule
Name: Matt
City, State, Zip: Carlisle, PA 17015
Contact: PM
Price: $275 +shipping (paypal, USPS money order, cleared personal check)

Trades considered: +1mm valves for G and/or swirl heads, Eibach springs for G body, FWD-P F4 cam, HE351CW Holset turbo

Description:

Professionally ported 2 piece intake. Had this completely stripped down to bare metal at my machine shop, then ported. Bumps in runners taken 75% down (the most you can safely do without welding the back of the manifold), 2 halves port matched, and opened for 52mm throttle body. Painted with a high temp ceramic paint (good for 2000 degrees), and the top fins sanded back off for the stock look.

Only issue is there was slight damage to the fins on the top. At some point it looks like someone dropped it and it dented in. Strictly cosmetic. I took a close up pic of it.

http://i105.photobucket.com/albums/m216/87wagon/intake1.jpg~original (http://s105.photobucket.com/user/87wagon/media/intake1.jpg.html)


http://i105.photobucket.com/albums/m216/87wagon/intake3.jpg~original (http://s105.photobucket.com/user/87wagon/media/intake3.jpg.html)

http://i105.photobucket.com/albums/m216/87wagon/intake4-2.jpg~original (http://s105.photobucket.com/user/87wagon/media/intake4-2.jpg.html)

[moparzrule]

Also have a stock rail, been modded for big power. Inner tube removed, ends drilled 1/4'' NPT, far end plugged and then close end has a 3/8'' barb on it.

+$40 with the intake

http://i105.photobucket.com/albums/m216/87wagon/2piecewithrail.jpg~original (http://s105.photobucket.com/user/87wagon/media/2piecewithrail.jpg.html)

http://i105.photobucket.com/albums/m216/87wagon/modded2piecerail.jpg~original (http://s105.photobucket.com/user/87wagon/media/modded2piecerail.jpg.html)

[moparzrule]

Sold.